View larger
M23-12S1N12W500S 1320259 PHOENIX CONTACT M23, Conect. plug. to be apar. front wall, series: M23 PRO Signal, ..
M23-12S1N12W500S
1320259
PHOENIX CONTACT
1 Pcs.
Cables > Circular connector, mounting (without cable)
Field Device Connectors (FDC)
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
The Phoenix Contact M23-12S1N12W500S is an M23, Conect. plug. to be apar. front wall, series: M23 PRO Signal, .. designed to deliver dependable signal routing across control cabinet boundaries in automated manufacturing systems. Front wall connection plugs provide secure, serviceable interface points for industrial signal harnesses.
Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- General notes: Take into account the derating curve.
- Product Type: Circular connectors (device side)
- Combustibility class according to UL 94: V0
- Insulating body Coding: N
- Insulation body material: PA 6.6
- Contact Material: CuZn
- Contact Surface Material: Ni/Au
- Manoeuvring cycles: 100
- Link: Weld connection
- Contact Switching Type: female
- Application: Signal
- No. of poles: 12
- Direction of rotation: standard
- Insertion plan: 12
- Contact Diameter Signal contacts: 1 mm
More info
▲| General notes | Take into account the derating curve. |
| General notes | Take into account the derating curve. |
| Safety Warning | |
| Safety instructions | WARNING: Connectors must not be connected or disconnected under load. Failure to comply with it and use it in accordance with the rules may result in damage to persons and/or property. |
| • WARNING: Only operate products in perfect condition. Regularly check the products for damage. Immediately take out defective products. Replace the damaged products. The item cannot be repaired. | |
| • WARNING: Have the product installed and operated only by qualified electrical personnel in accordance with the following safety instructions. Specialists must be familiar with the basics of electrical engineering and must be able to recognize and avoid hazards. The corresponding symbol on the packaging indicates that the intervention of qualified electrical personnel is required. | |
| • The products are suitable for the areas of system assembly, control and assembly of electrical appliances. | |
| • When operating the connector outdoors, these environments must be protected from environmental influences. | |
| • Packaged products must not be handled or opened incorrectly. | |
| • Only use plugs specified in the standards specified in the technical data (e.g. those listed in the product accessories on the phoenixcontact.com/products website). | |
| • If you use the product directly in conjunction with third-party products, you are entirely responsible for this. | |
| • For operating voltages > 50 VAC, conductive connector housings must be grounded | |
| • Make sure that the protective or operating ground is properly engaged. | |
| • For bundling different electrical circuits in a cable and/or connector, VDE 0100/1.97 § 411.1.3.2 and DIN EN 60 204/11.98 § 14.1.3 apply | |
| • Use only the tool recommended by Phoenix Contact | |
| • Observe the installation instructions/Design In documents for the product in the download area on the web at phoenixcontact.com/products. | |
| • Use the connector only in the fully engaged and locked state. | |
| • Make sure that the tensile load does not exceed the limits set by the standard when laying the cable. | |
| • Take into account the minimum bending radius of the cable. Lay the cable without twisting it. | |
| • The connector will become warm during normal operation. Depending on environmental conditions, the surface of the connector may be continuously heated. In this case, the user is responsible for the application of the safety instructions (e.g. DIN EN ISO 13732-1:2008-12). | |
| Product Type | Circular connectors (device side) |
| Combustibility class according to UL 94 | V0 |
| Insulating body | |
| Coding | N |
| Insulation body material | PA 6.6 |
| Contact Material | CuZn |
| Contact Surface Material | Ni/Au |
| Manoeuvring cycles | 100 |
| Link | Weld connection |
| Contact Switching Type | female |
| Application | Signal |
| No. of poles | 12 |
| Direction of rotation | standard |
| Insertion plan | 12 |
| Contact DiameterSignal contacts | 1 mm |
| Wire sectionSignal contactsMin. | 0.08 mm² |
| Wire sectionSignal contactsMax. | 1 mm² |
| Rated current for each signal contact | 8 A |
| note | to a max. connection section |
| Rated Voltage Signal Contact | 150 V |
| Sizing Impulse Voltage | 2.5 kV |
| Overvoltage Category | Iii |
| Degree of pollution | 3 |
| Installation height | 2000 m |
| custody | |
| Housing Material | GD-Zn |
| Flange size | 26 mm x 26 mm |
| Clamping Type | For standard and ONECLICK quick locking |
| Screwing Pg | without |
| Degree of protection (engaged) | IP66 / IP68 (2 m / 24 h) |
| Thread type | M23 |
| Environmental conditions | |
| Degree of protection | IP68 |
| Ambient temperature (operating) | -40 °C ... 105 °C (see derating) |
| Constant temperature | 125 °C (DIN EN 60512-9-2 / 1000 h) |