View larger
IOA REL 120V DO/BFI/3.0A/EX 2910154 PHOENIX CONTACT Input/output module
IOA REL 120V DO/BFI/3.0A/EX
2910154
PHOENIX CONTACT
1 Pcs.
Automation > Switching relay
INTERFACE Components (IF)
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
An input/output module, specifically the IOA REL 120V DO/BFI/3.0A/EX 2910154 PHOENIX CONTACT Input/output module, acts as a dedicated interface between field-level sensors or actuators and a central processor. These interface modules ensure precise data translation and safeguard sensitive hardware architectures from overvoltage and ground loops.
Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Complete with socket (EF003359): Yes
- With detachable clamps (EF003340): No
- With LED indication (EF005950): Yes
- Number of contacts as normally closed contact (EF008255): 0
- Number of contacts as normally open contact (EF008256): 0
- Number of contacts as change-over contact (EF008257): 1
- Type of switch contact (EF003358): Single contact
- With forced-guided contacts (EF003357): No
- Material of contact surface (EF004020): Untreated
- Nominal current (EF000001): 0.0135 A
- Degree of protection (IP) (EF005474): IP20
- Width (EF000008): 10.3 mm
- Height (EF000040): 64.2 mm
- Depth (EF000049): 72.9 mm
More info
▲Key Commercial Data
| Orderkey | 2910154 |
|---|---|
| Packing unit | 1 pc |
| Note | Made to Order (non-returnable) |
| Catalog page | Page 556 (C-5-2017) |
| GTIN | 4055626447285 |
| Weight per Piece (excluding packing) | 0.000 g |
| Custom tariff number | 85364900 |
| Country of origin | US (United States) |
Ambient conditions
| Ambient temperature (operation) | -40 °C ... 70 °C |
|---|---|
| Ambient temperature (storage/transport) | -40 °C ... 70 °C |
Coil side
| Nominal input voltage UN | 24 V DC |
|---|---|
| Input voltage range in reference to UN | 0.9 ... 1.1 |
| Typical input current at UN | 13.5 mA |
| Typical response time | 5 ms |
| Typical release time | 8 ms |
| Protective circuit | Reverse polarity protection Polarity protection diode |
| Free-wheeling diode Damping diode | |
| Operating voltage display | Yellow LED |
Contact side
| Contact type | 1 PDT |
|---|---|
| Type of switch contact | Single contact |
| Contact material | AgSnO |
| Maximum switching voltage | 120 V AC |
| Min. switching current | 10 mA (at 12 V) |
| Maximum inrush current | on request |
| Limiting continuous current | 3 A (fuse limited) |
| Interrupting rating (ohmic load) max. | 23 W (at 110 V DC) |
| 360 VA (at 120 V AC) |
General
| Operating mode | 100% operating factor |
|---|---|
| Degree of protection | IP20 |
| Mechanical service life | 2x 107cycles |
| Mounting position | any |
| Assembly instructions | Plugs into VIP/...BASE... |
| Net weight (SAP) | 0 g |
Standards and Regulations
| Standards/regulations | IEC 60664 |
|---|---|
| DIN EN 50178 | |
| Flammability rating according to UL 94 | V0 |
| Conformance | ANSI/ISA 60079-0; 60079-15 |
| ANSI/IEC 60529 | |
| FM 3600; 3611; 3810 | |
| ATEX | Sira 17ATEX4293X; II 3G Ex nA nC IIC T4 Gc |
| IECEx | IECEx SIR 17.0078X; Ex nA nC IIC T4 Gc |
| UL, USA/Canada | Class I, Div. 2, Groups A, B, C, D T4 Class I, Zone 2, IIC T4 |
| CSA, USA/Canada | Non-incendive: Class I, Div. 2, Groups A, B, C, D T4 Class I, Zone 2, AEx nA nC IIC T4 Gc Connection to Class I, II, III, Div. 2, Groups A, B, C, D, E, F, G Non-incendive: Class I, Div. 2, Groups A, B, C, D T4 Ex nA nC IIC T4 Gc Connection to Class I, II, and III, Zone 2, Groups A, B, C, D, E, F, G |
Environmental Product Compliance
| REACh SVHC | Lead 7439-92-1 |
|---|---|
| China RoHS | Environmentally Friendly Use Period = 50 |
| For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |