View larger
IB IL SGI 2/F-2MBD-PAC 2878735 PHOENIX CONTACT Inline function terminal
IB IL SGI 2/F-2MBD-PAC
2878735
PHOENIX CONTACT
1 Pcs.
Automation > Fieldbus, decentr. periphery - analogue I/O module
I/O
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
A Phoenix Contact inline function terminal, part number IB IL SGI 2/F-2MBD-PAC, is utilized within modular control setups to interface specialized measurement equipment with a programmable logic controller. These nodes ensure robust data collection and signal conversion across complex industrial installations.
Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Supply voltage DC (EF007534): 19.2 V
- Voltage type (supply voltage) (EF002991): DC
- Input, current (EF003204): No
- Input, voltage (EF003205): No
- Input, resistor (EF003206): No
- Input, resistance thermometer (EF003207): No
- Input, thermocouple (EF003208): No
- Input signal, configurable (EF003209): No
- Output, current (EF003212): No
- Output, voltage (EF003213): No
- Output signal configurable (EF003214): No
- Number of analogue inputs (EF001994): 0
- Number of analogue outputs (EF001995): 0
- Analogue inputs configurable (EF008518): No
- Analogue outputs configurable (EF008519): No
- Number of HW-interfaces industrial Ethernet (EF003020): 0
More info
▲Key Commercial Data
| Orderkey | 2878735 |
|---|---|
| Packing unit | 1 pc |
| Note | Made to Order (non-returnable) |
| Catalog page | Page 283 (AX-2009) |
| GTIN | 4017918996437 |
| Weight per Piece (excluding packing) | 190.000 g |
| Custom tariff number | 85389091 |
| Country of origin | DE (Germany) |
Ambient conditions
| Ambient temperature (operation) | -25 °C ... 55 °C |
|---|---|
| Ambient temperature (storage/transport) | -25 °C ... 85 °C |
| Permissible humidity (operation) | 10 % ... 95 % (non-condensing) |
| Permissible humidity (storage/transport) | 10 % ... 95 % (non-condensing) |
| Air pressure (operation) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| Air pressure (storage/transport) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| Degree of protection | IP20 |
General
| Mounting type | DIN rail |
|---|---|
| Net weight | 190 g |
| Operating mode | Process data operation with 3 words, PCP with 1 word |
| Diagnostics messages | Failure of the power supply at UANAError message in the process data |
| Failure of or insufficient communications power ULI/O error message sent to the bus coupler | |
| Peripheral fault Error message in the process data |
Interfaces
| Designation | Inline local bus |
|---|---|
| No. of channels | 2 |
| Connection method | Inline data jumper |
| Transmission speed | 2 Mbps |
| Transmission physics | Copper |
Inline potentials
| Designation | Communications power (UL) |
|---|---|
| Supply voltage | 7.5 V DC (via voltage jumper) |
| Current consumption | typ. 100 mA |
| max. 110 mA | |
| Designation | Supply of analog modules (UANA) |
| Supply voltage | 24 V DC (via voltage jumper) |
| Supply voltage range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| Current consumption | typ. 8 mA (without strain gauge) |
| typ. 32 mA (with maximum load of 58.3 Ω when UV= 5 V) | |
| Power consumption | typ. 0.94 W (Device in nominal operation) |
Analog inputs
| Description of the input | Input channels for strain gauge |
|---|---|
| Number of inputs | 2 |
| Connection technology | 6 or 4-wire, twisted pair shielded cable |
| Bridge difference Ud | Measuring range specified by selecting the characteristic and the bridge voltage |
| Bridge voltage U0 | 3.3 V |
| Characteristics | +1 mV/V, +2 mV/V, +3 mV/V, +4 mV/V |
| ±1 mV/V, ±2 mV/V, ±3 mV/V, ±4 mV/V | |
| Measured value representation | 15 bit + sign bit |
Analog outputs
| Output description | Voltage output |
|---|---|
| Number of outputs | 2 |
| Impedance | > 58.3 Ω (typical; permissible total resistance of the strain gauge) |
| Output voltage | 5 V |
| 3.3 V | |
| Output current | typ. 55 mA (with UV= 3.3 V) |
| typ. 85 mA (with UV= 5 V) |
Electrical isolation
| Test section | Logic/analog I/O (digital isolator) 500 V AC 50 Hz 1 min. |
|---|---|
| Functional earth ground/analog I/O (isolating distance) 500 V AC 50 Hz 1 min. | |
| Logic/functional earth ground (isolating distance) 500 V AC 50 Hz 1 min. |
Standards and Regulations
| Connection in acc. with standard | CUL |
|---|---|
| Protection class | III, IEC 61140, EN 61140, VDE 0140-1 |
Environmental Product Compliance
| China RoHS | Environmentally friendly use period: unlimited = EFUP-e |
|---|---|
| No hazardous substances above threshold values |