PHOENIX CONTACT IB IL AO 2/SF-PAC IB IL AO 2/SF-PAC 2863083 PHOENIX CONTACT Inline terminal View larger
Images are for illustrative purposes only. Please refer to data sheet for details

IB IL AO 2/SF-PAC 2863083 PHOENIX CONTACT Inline terminal

IB IL AO 2/SF-PAC

2863083

PHOENIX CONTACT

1 Pcs.

Inline terminal Inline, Analog output terminal, Analog outputs: 2, 0 V ... 10 V, 0 mA... 20 mA, 4 mA... 20 mA, connection technology: 2 conductors, transmission rate on the local bus: 500 kBit/s, protection rating: IP20, including inline connectors and marking fields

Automation > Fieldbus, decentr. periphery - analogue I/O module
I/O

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.

Request Quote

Product Overview

Designed for modular control architectures, the Phoenix Contact IB IL AO 2/SF-PAC Inline terminal provides straightforward integration of analog output channels within local bus systems. Inline terminals are deployed across automated factory floors to handle localized signal distribution, communication tasks, and peripheral device interfacing. Pricing, availability and lead time are confirmed per enquiry through an RFQ.

  • Width: 48.8 mm
  • Height: 135 mm
  • Depth: 71.5 mm
  • Note on dimensions: Housing dimensions
  • Note on application Note on application: Only for industrial use
  • Utilization restriction CCCex note: Use in potentially explosive areas is not permitted in China.
  • Inline local bus Number of interfaces: 2
  • Connection method: Inline data jumper
  • Transmission speed: 500 kbps
  • Module ID code (dec.): 91
  • ID code (hex): 5B
  • Length code (hex): 02
  • Length code (dec): 02
  • Process data channel: 32 bit
  • Input address area: 4 Byte
  • Output address area: 4 Byte

More info

▲
Technical data

Dimensions
Dimensional drawing
Width48.8 mm
Height135 mm
Depth71.5 mm
Note on dimensionsHousing dimensions

Notes
Note on application
Note on applicationOnly for industrial use
Utilization restriction
CCCex noteUse in potentially explosive areas is not permitted in China.

Interfaces
Inline local bus
Number of interfaces2
Connection methodInline data jumper
Transmission speed500 kbps

System properties
Module
ID code (dec.)91
ID code (hex)5B
Length code (hex)02
Length code (dec)02
Process data channel32 bit
Input address area4 Byte
Output address area4 Byte
Register length32 bit
Required parameter data6 Byte
Required configuration data5 Byte

Output data
Analog:
Output nameAnalog outputs
Connection technology2-conductor
Note regarding the connection technologyshielded
Number of outputs2
D/A converter resolution16 bit
Protective circuitTransient protection of outputs
Short-circuit protection of outputs
Representation of output values16 bits (15 bits + sign)
DAC resolution16 bit
Process data update< 1 ms
Current output signal0 mA ... 20 mA
4 mA ... 20 mA
Load/output load current output≤ 500 Ω
Voltage output signal0 V ... 10 V
Load/output load voltage output≥ 2 kΩ

Product properties
Product typeI/O component
Product familyInline
Typemodular
Scope of deliveryincluding Inline connectors and marking fields
Operating modeProcess data mode with two words
Diagnostics messagesI/O supply failure I/O error message sent to the bus coupler
Data management status
Article revision08
Insulation characteristics
Overvoltage categoryII (IEC 60664-1, EN 60664-1)
Pollution degree2 (IEC 60664-1, EN 60664-1)

Electrical properties
Maximum power dissipation for nominal condition2.6 W
Potentials: Communications power (UL)
Supply voltage7.5 V DC (via voltage jumper)
Current drawmax. 45 mA
typ. 36 mA
Potentials: Supply of analog modules (UANA)
Supply voltage24 V DC (via voltage jumper)
Supply voltage range19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current drawmax. 95 mA
typ. 75 mA
Electrical isolation/isolation of the voltage ranges
Test voltage: 7.5 V supply (bus logic), 24 V supply UANA/ I/O500 V AC, 50 Hz, 1 min.
Test voltage: 7.5 V supply (bus logic), 24 V supply UANA/ functional ground500 V AC, 50 Hz, 1 min.
Test voltage: 24 V supply (I/O) / functional ground500 V AC, 50 Hz, 1 min.

Connection data
Connection technology
Connection nameInline connector
Conductor connection
Connection methodSpring-cage connection
Conductor cross section rigid0.08 mm² ... 1.5 mm²
Conductor cross section flexible0.08 mm² ... 1.5 mm²
Conductor cross section AWG28 ... 16
Stripping length8 mm
Inline connector
Connection methodSpring-cage connection
Conductor cross section, rigid0.08 mm² ... 1.5 mm²
Conductor cross section, flexible0.08 mm² ... 1.5 mm²
Conductor cross section AWG28 ... 16
Stripping length8 mm

Environmental and real-life conditions
Ambient conditions
Ambient temperature (operation)-25 °C ... 55 °C
Degree of protectionIP20
Air pressure (operation)70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)70 kPa ... 106 kPa (up to 3000 m above sea level)
Ambient temperature (storage/transport)-25 °C ... 85 °C
Permissible humidity (operation)10 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)10 % ... 95 % (non-condensing)

Standards and regulations
Protection classIII (IEC 61140, EN 61140, VDE 0140-1)

Mounting
Mounting typeDIN rail mounting

Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.