View larger
ME 22,5 UT/FE BUS/10 GN 2908755 PHOENIX CONTACT Mounting base housing
ME 22,5 UT/FE BUS/10 GN
2908755
PHOENIX CONTACT
10 Pcs.
Automation > Extruded profile modular housing
Housing (HS)
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
Phoenix Contact part number ME 22,5 UT/FE BUS/10 GN (2908755) is an ME 22,5 UT/FE BUS/10 GN PHOENIX CONTACT Mounting base housing engineered for secure electronic assembly inside control cabinets. Mounting base housings provide structural support and environmental protection for internal printed circuit boards and modular terminal equipment in industrial control panels. Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Assembly note: Refer to the data sheet for the range in the download area.
- Recommendation: Material of contact pads for bus connector, galvanic gold (hard gold)
- Product type: Enclosure bottom part
- Housing type: DIN rail housing
- Housing series: ME
- Product family: ME 22,5..
- Type: Lower housing parts with vents, housing cover necessary to complete the module
- Type: Lower housing part with metal foot catch, with FE contact, tall design
- Ventilation openings present: yes
- Data management status Article revision: 15
- Nominal current I N: 8 A (parallel contacts)
- Rated voltage (III/3): 63 V
- Rated surge voltage (III/3): 1.5 kV
- Rated voltage (III/2): 150 V
- Rated surge voltage (III/2): 2.5 kV
- Rated voltage (II/2): 300 V
More info
▲| Assembly note | Refer to the data sheet for the range in the download area. |
| Recommendation | Material of contact pads for bus connector, galvanic gold (hard gold) |
| Product type | Enclosure bottom part |
| Housing type | DIN rail housing |
| Housing series | ME |
| Product family | ME 22,5.. |
| Type | Lower housing parts with vents, housing cover necessary to complete the module |
| Type | Lower housing part with metal foot catch, with FE contact, tall design |
| Ventilation openings present | yes |
| Data management status | |
| Article revision | 15 |
| Nominal current IN | 8 A (parallel contacts) |
| Rated voltage (III/3) | 63 V |
| Rated surge voltage (III/3) | 1.5 kV |
| Rated voltage (III/2) | 150 V |
| Rated surge voltage (III/2) | 2.5 kV |
| Rated voltage (II/2) | 300 V |
| Rated surge voltage (II/2) | 2.5 kV |
| Dimensional drawing | |
| Width [w] | 22.6 mm |
| Height [h] | 99 mm |
| PCB design | |
| PCB thickness | 1.4 mm ... 1.8 mm |
| Material data - contact | |
| Contact material | Cu alloy |
| Surface characteristics | gold-plated |
| Material data - housing | |
| Color (Housing) | green (6021) |
| Insulating material | PA |
| Insulating material group | I |
| CTI according to IEC 60112 | 600 |
| Flammability rating according to UL 94 | V0 |
| Connection 1 | |
| Insulating material | PA |
| CTI according to IEC 60112 | 600 |
| Air clearances and creepage distances | |
| Specification | IEC 60664-1:2007-04 |
| Insulating material group | I |
| Rated insulation voltage (III/3) | 63 V |
| Rated surge voltage (III/3) | 1.5 kV |
| minimum clearance value - non-homogenous field (III/3) | 0.8 mm |
| minimum creepage distance (III/3) | 1.6 mm |
| Rated insulation voltage (III/2) | 150 V |
| Rated surge voltage (III/2) | 2.5 kV |
| minimum clearance value - non-homogenous field (III/2) | 1.5 mm |
| minimum creepage distance (III/2) | 0.8 mm |
| Rated insulation voltage (II/2) | 300 V |
| Rated surge voltage (II/2) | 2.5 kV |
| minimum clearance value - non-homogenous field (II/2) | 1.5 mm |
| minimum creepage distance (II/2) | 1.5 mm |
| Ambient conditions | |
| Max. IP code to attain | IP20 |
| Ambient temperature (operation) | -40 °C ... 105 °C (dependent on the derating curve) |
| Ambient temperature (storage/transport) | -40 °C ... 55 °C |
| Relative humidity (storage/transport) | 30 % ... 70 % |
| Ambient temperature (assembly) | -5 °C ... 100 °C |
| Relative humidity (storage/transport) | 80 % |
| Number of PCB holders | 1 |
| Type of PCB mount | Insertion (optional latching by PCB stop) |
| Thickness of the PCB | 1.4 mm ... 1.8 mm |
| Mounting type | DIN rail mounting |
| Type of packaging | packed in cardboard |
| Outer packaging type | Carton |