PHOENIX CONTACT HC-B10-I-PT-F HC-B10-I-PT-F 1407729 PHOENIX CONTACT HEAVYCON socket insert, B10 series, 10 + PE-pos., push-in connection View larger
Images are for illustrative purposes only. Please refer to data sheet for details

HC-B10-I-PT-F 1407729 PHOENIX CONTACT HEAVYCON socket insert, B10 series, 10 + PE-pos., push-in connection

HC-B10-I-PT-F

1407729

PHOENIX CONTACT

1 Pcs.

HEAVYCON socket insert, B10 series, 10 + PE-pos., push-in connection Contact insert, number of poles: 10+PE, size: B10, number of connections per pole: 1, Female, Push-in connection, 500 V, 16 A, 0.14 mm² ... 2.5 mm², Application: Power Contact insert, number of positions: 10+PE, size: B10, number of connections per position: 1, Socket, Push-in connection, 500 V, 16 A, 0.14 mm2 ... 2.5 mm2, application: Power

Connectors > Contact insert for rectangular connectors
Industrial plug-in connectors/interfaces

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.

Request Quote

Product Overview

A Phoenix Contact HC-B10-I-PT-F socket insert features tool-free push-in connection technology for rapid and reliable conductor termination inside B10 rectangular connector housings. It is engineered to maintain secure electrical contact in demanding power distribution networks. Pricing, availability, and lead time are confirmed per enquiry through an RFQ.

  • General: only use flexible conductors with ferrules
  • General: Connectors may be operated only when there is no load/voltage.
  • Assembly note: To ensure correct use, installation in housing with IP54 protection or better is required
  • Product type: Contact insert with a fixed no. of positions
  • Series: HC-B
  • Application: Power
  • Type: B10
  • Number of positions: 10
  • Connection profile: 10+PE
  • Contact numbering: 1 - 10
  • Number of connections per position: 1
  • Contact material type: rolled
  • Data management status Article revision: 08
  • Insulation characteristics Overvoltage category: III
  • Degree of pollution: 3
  • Width: 34 mm

More info

▲
Technical data

Notes
Generalonly use flexible conductors with ferrules
GeneralConnectors may be operated only when there is no load/voltage.

Mounting
Assembly noteTo ensure correct use, installation in housing with IP54 protection or better is required

Product properties
Product typeContact insert with a fixed no. of positions
SeriesHC-B
ApplicationPower
TypeB10
Number of positions10
Connection profile10+PE
Contact numbering1 - 10
Number of connections per position1
Contact material typerolled
Data management status
Article revision08
Insulation characteristics
Overvoltage categoryIII
Degree of pollution3

Dimensions
Dimensional drawing
Width34 mm
Height37 mm
Length64 mm
Drill hole distance, horizontal57 mm
Drill hole distance, vertical27 mm
Mechanical characteristics
Contact diameter2.5 mm

Connection data
Connection technology
Connection technologyPush-in connection
Number of connections per position1
Connection in acc. with standardIEC / EN
Conductor connection
Conductor cross section0.14 mm² ... 2.5 mm²
Connection cross section AWG26 ... 14
Tightening torque0.8 Nm ... 1.2 Nm (PE connection)
0.5 Nm ... 0.8 Nm (Mounting screws for mounting in the HEAVYCON housing)
Stripping length8 mm ... 10 mm

Electrical properties
Rated voltage (III/3)500 V
Rated surge voltage6 kV
Rated current16 A (power contacts)
SCCR5 kA (UL 2237)

Mechanical properties
Mechanical data
Insertion/withdrawal cycles≥ 500

Material specifications
Flammability rating according to UL 94V0
Contact materialCopper alloy
Contact surface materialAg/Sn (tarnish protection)
Contact carrier materialPC
Standards/regulationsPC: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3)

Environmental and real-life conditions
Ambient conditions
Ambient temperature (operation)-40 °C ... 125 °C (including heating up of contacts)

Standards and regulations
Testing
Standards/regulationsPC: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3)

Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.