View larger
Images are for illustrative purposes only. Please refer to data sheet for details
HC-HS 2-D7-ESTS 1586277 PHOENIX CONTACT Contact insert
HC-HS 2-D7-ESTS
1586277
PHOENIX CONTACT
10 Pcs.
Contact insert
Contact insert, number of poles: 2+PE, size: D7, power contacts: 2, Male, Axial screw connection, 400 V, 40 A, 4 mm² ... 10 mm², Application: Power
Connectors > Contact insert for rectangular connectors
Industrial plug-in connectors/interfaces
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
Phoenix Contact contact insert (part number HC-HS 2-D7-ESTS) provides high-current pin termination capabilities for compact D7 heavy-duty connector enclosures used in demanding industrial power circuits.
Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Number of power contacts (EF012216): 2
- Number of control contacts (EF012217): 0
- Contact insert without contacts (EF007324): No
- Contact type (EF001587): Pin
- Number of poles (EF001391): 2
- Diameter plug-in contact (EF007320): 4 mm
- Material connector insert (EF007545): Thermoplastic
- Rated current In (EF008250): 40 A
- Ambient temperature (EF002386): 125 °C
- Operating temperature (EF002393): -40 °C
- Rated voltage (EF000228): 400 V
- Rated surge voltage (EF002993): 6 kV
- Over voltage category (EF006785): III
- Pollution degree (EF006786): 3
- Type of electric connection (EF003961): Screw connection
- With wire protection (EF000550): No
More info
▲Key Commercial Data
| Orderkey | 1586277 |
|---|---|
| Packing unit | 10 pc |
| Minimum order quantity | 10 pc |
| Note | Made to Order (non-returnable) |
| Catalog page | Page 507 (C-2-2017) |
| GTIN | 4046356410229 |
| Weight per Piece (excluding packing) | 23.410 g |
| Custom tariff number | 85366990 |
| Country of origin | DE (Germany) |
General
| Note | for HC-D7 housing, axial connection 2.0 mm, Allen key |
|---|---|
| The axial screw connection must be established using a 2 mm Allen key (for stranded conductors only) | |
| Connection method | Axial screw connection |
| Tightening torque | 1.8 Nm |
| Degree of pollution | 3 |
| Overvoltage category | III |
| Number of positions | 2+PE |
| Insertion/withdrawal cycles | ≥ 500 |
| Size | D7 |
| Contact numbering | 1 - 2 |
| Conductor cross section | 4 mm² ... 10 mm² |
| Connection cross section AWG | 10 ... 8 |
| Stripping length of the individual wire | 8 mm +1 |
| Assembly instructions | To ensure correct use, installation in housing with IP54 protection or better is required |
| Connection | Note regarding axial connection technology: Only for stranded wires. The specified conductor cross sections refer to the geometric cross section of the cable used. Cables with a geometric cross section which deviates significantly from the nominal cable cross section must be checked before use. The axial connection technology connection space is designed for fine strand cables according to VDE 0295 Class 5. Deviating cable structures (e.g., Class 6 cables) must be checked before use. Assembly instructions Before assembly, ensure that the tapered screw is fully loosened (chamber is open). Cables must not be twisted. The wires must be pushed into the contact chamber as far as they will go (until the insulation touches the contact). Hold the wires in position and tighten using an Allen key. The used wire end must be cut off before reconnection. The terminal screw must only be retightened once to prevent the litz wires from breaking. To prevent damage to the contact, the wire/cable must be mechanically held at an appropriate distance from the connection point (e.g., when used in a plate cut out). For notes on correct execution, see DIN VDE 0100-520:2003-06. Unused connections must be tightened with maximum torque. |
Ambient conditions
| Ambient temperature (operation) | -40 °C ... 125 °C (including heating up of contacts) |
|---|
Standards and Regulations
| Connection in acc. with standard | CUL |
|---|---|
| Constructional and testing regulations | DIN VDE 0627/86 |
| DIN VDE 0110/02.79 | |
| DIN VDE 0110-1/04.97 | |
| IEC 60664-1, DIN IEC 60512 | |
| IEC 60352 | |
| Flammability rating according to UL 94 | V0 |
Environmental Product Compliance
| REACh SVHC | Lead 7439-92-1 |
|---|---|
| China RoHS | Environmentally Friendly Use Period = 50 |
| For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |