PHOENIX CONTACT HC-B 6-I-CT-M HC-B 6-I-CT-M 1648157 PHOENIX CONTACT Contact insert View larger
Images are for illustrative purposes only. Please refer to data sheet for details

HC-B 6-I-CT-M 1648157 PHOENIX CONTACT Contact insert

HC-B 6-I-CT-M

1648157

PHOENIX CONTACT

1 Pcs.

Contact insert Contact insert, number of poles: 6+PE, size: B6, number of connections per pole: 1, Male, Crimped connection, 500 V, 16 A, 0.5 mm² ... 4 mm² Contact insert, number of positions: 6+PE, size: B6, number of connections per position: 1, Pin, Crimp connection, 500 V, 16 A, 0.5 mm2 ... 4 mm2

Connectors > Contact insert for rectangular connectors
Industrial plug-in connectors/interfaces

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.

Request Quote

Product Overview

The Phoenix Contact HC-B 6-I-CT-M contact insert acts as a foundational multi-pole pin block for heavy-duty industrial connector shells. These fixed-position inserts organize electrical feeds in control cabinets and machinery harnesses, providing dependable mating cycles for complex manufacturing systems.

Pricing, availability and lead time are confirmed per enquiry through an RFQ.

  • General: Connectors may be operated only when there is no load/voltage.
  • Assembly note: To ensure correct use, installation in housing with IP54 protection or better is required
  • Product type: Contact insert with a fixed no. of positions
  • Series: HC-B
  • Type: B6
  • Number of positions: 6
  • Connection profile: 6+PE
  • Contact numbering: 1 - 6
  • Number of connections per position: 1
  • Contact material type: turned
  • Data management status Article revision: 11
  • Insulation characteristics Overvoltage category: III
  • Degree of pollution: 3
  • Width: 34 mm
  • Height: 32 mm
  • Length: 50.5 mm

More info

▲
Technical data

Notes
GeneralFor HEAVYCON ADVANCE and HEAVYCON housing of B6 type, crimp contacts CK 2,5-ED (crimp contacts not included in the scope of supply).
GeneralConnectors may be operated only when there is no load/voltage.

Mounting
Assembly noteTo ensure correct use, installation in housing with IP54 protection or better is required
Remove the crimp contact using a screwdriver. The opening for the screwdriver is next to the opening where the conductor is inserted.

Product properties
Product typeContact insert with a fixed no. of positions
SeriesHC-B
TypeB6
Number of positions6
Connection profile6+PE
Contact numbering1 - 6
Number of connections per position1
Contact material typeturned
Data management status
Article revision11
Insulation characteristics
Overvoltage categoryIII
Degree of pollution3

Dimensions
Dimensional drawing
Width34 mm
Height32 mm
Length50.5 mm
Drill hole distance, horizontal44 mm
Mechanical characteristics
Contact diameter2.5 mm

Connection data
Connection technology
Connection technologyCrimp connection
Number of connections per position1
Connection in acc. with standardIEC / EN
Conductor connection
Conductor cross section0.5 mm² ... 4 mm²
Connection cross section AWG20 ... 12
Tightening torque0.8 Nm ... 1.2 Nm (PE connection)
0.5 Nm ... 0.8 Nm (Mounting screws for mounting in the HEAVYCON housing)
Stripping length of the individual wire7.5 mm

Electrical properties
Rated voltage (III/3)500 V
Rated surge voltage6 kV
Rated current16 A
SCCR5 kA (UL 2237)

Mechanical properties
Mechanical data
Insertion/withdrawal cycles≥ 500

Material specifications
Flammability rating according to UL 94V0
Contact materialCopper alloy
Contact surface materialAg (alternatively Au)
Contact carrier materialPC
Standards/regulationsPC: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3)

Environmental and real-life conditions
Ambient conditions
Degree of protectionIP20
Ambient temperature (operation)-40 °C ... 125 °C (including heating up of contacts)

Standards and regulations
Constructional and testing regulationsDIN EN 61984
DIN EN 60664
IEC 60352
TestsDIN EN 61984
DIN EN 60664
IEC 60352
Testing
Standards/regulationsPC: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3)

Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.