View larger
HC-DD108-I-CT-F 1584130 PHOENIX CONTACT Contact insert
HC-DD108-I-CT-F
1584130
PHOENIX CONTACT
1 Pcs.
Connectors > Contact insert for rectangular connectors
Industrial plug-in connectors/interfaces
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
Phoenix Contact HC-DD108-I-CT-F 1584130 PHOENIX CONTACT Contact insert acts as a high-density connection interface inside heavy-duty industrial connector shells. These internal blocks bundle large quantities of control lines securely, streamlining multi-signal routing for complex machinery and automation panels. Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- General: For housing HC-B24
- General: Connectors may be operated only when there is no load/voltage.
- Assembly note: To ensure correct use, installation in housing with IP54 protection or better is required
- Product type: Contact insert with a fixed no. of positions
- Series: HC-DD
- Application: Signal
- Type: B24
- Number of positions: 108
- Connection profile: 108+PE
- Contact numbering: 1 - 108
- Number of connections per position: 1
- Contact material type: turned
- Data management status Article revision: 13
- Insulation characteristics Overvoltage category: III
- Degree of pollution: 3
- Width: 34 mm
More info
▲| General | For housing HC-B24 |
| General | Connectors may be operated only when there is no load/voltage. |
| General | It is imperative that guide pins (HC-CST) and sockets (HC-CBU) are used to prevent tip collision due to misalignment. |
| Assembly note | To ensure correct use, installation in housing with IP54 protection or better is required |
| Product type | Contact insert with a fixed no. of positions |
| Series | HC-DD |
| Application | Signal |
| Type | B24 |
| B48 | |
| Number of positions | 108 |
| Connection profile | 108+PE |
| Contact numbering | 1 - 108 |
| Number of connections per position | 1 |
| Contact material type | turned |
| rolled | |
| Data management status | |
| Article revision | 13 |
| Insulation characteristics | |
| Overvoltage category | III |
| Degree of pollution | 3 |
| Dimensional drawing | |
| Width | 34 mm |
| Height | 34.5 mm |
| Length | 111 mm |
| Drill hole distance, horizontal | 104 mm |
| Drill hole distance, vertical | 27 mm |
| Mechanical characteristics | |
| Minimum housing height | 72 mm |
| Contact diameter | 1.6 mm |
| Connection technology | |
| Connection technology | Crimp connection |
| Number of connections per position | 1 |
| Connection in acc. with standard | IEC / EN |
| Conductor connection | |
| Conductor cross section | 0.14 mm² ... 2.5 mm² |
| Connection cross section AWG | 26 ... 14 |
| Tightening torque | 0.8 Nm ... 1.2 Nm (PE connection) |
| 0.5 Nm ... 0.8 Nm (Mounting screws for mounting in the HEAVYCON housing) | |
| Stripping length of the individual wire | 8 mm (0.14 mm² ... 1.5 mm²) |
| 6 mm (2.5 mm²) | |
| Rated voltage (III/3) | 250 V |
| Rated surge voltage | 4 kV |
| Rated current | 10 A |
| SCCR | 5 kA (UL 2237) |
| Mechanical data | |
| Insertion/withdrawal cycles | ≥ 500 |
| Flammability rating according to UL 94 | V0 |
| Contact material | Copper alloy |
| Contact surface material | Ag (alternatively Au) |
| Contact carrier material | PC |
| Standards/regulations | PC: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3) |
| Ambient conditions | |
| Ambient temperature (operation) | -40 °C ... 125 °C (including heating up of contacts) |
| Constructional and testing regulations | DIN VDE 0627/86 |
| DIN VDE 0110/02.79 | |
| DIN VDE 0110-1/04.97 | |
| IEC 60664-1, DIN IEC 60512 | |
| IEC 60352 | |
| Tests | DIN VDE 0627/86 |
| DIN VDE 0110/02.79 | |
| DIN VDE 0110-1/04.97 | |
| IEC 60664-1, DIN IEC 60512 | |
| IEC 60352 | |
| Testing | |
| Standards/regulations | PC: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3) |