View larger
HC-B 10-I-UT-F 1648186 PHOENIX CONTACT HEAVYCON female insert, B10 series, 10-pos., screw connection
HC-B 10-I-UT-F
1648186
PHOENIX CONTACT
1 Pcs.
Connectors > Contact insert for rectangular connectors
Industrial plug-in connectors/interfaces
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
Phoenix Contact HEAVYCON female insert (part number HC-B 10-I-UT-F) provides a secure screw-connection terminal block designed for B10 series heavy-duty connector housings. Industrial facilities rely on these inserts to maintain dependable multi-pole circuit paths in machine building and control systems.
Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Number of power contacts (EF012216): 10
- Number of control contacts (EF012217): 0
- Contact insert without contacts (EF007324): No
- Contact type (EF001587): Bus
- Number of poles (EF001391): 10
- Diameter plug-in contact (EF007320): 2.5 mm
- Material connector insert (EF007545): Thermoplastic
- Rated current In (EF008250): 16 A
- Ambient temperature (EF002386): 125 °C
- Operating temperature (EF002393): -40 °C
- Rated voltage (EF000228): 500 V
- Rated surge voltage (EF002993): 6 kV
- Over voltage category (EF006785): III
- Pollution degree (EF006786): 3
- Type of electric connection (EF003961): Screw connection
- With wire protection (EF000550): No
More info
▲General
| Note | For HEAVYCON ADVANCE and HEAVYCON housing of B10 type. Plug-in connections may only be operated only when there is no load/voltage. |
|---|---|
| Connection method | Screw connection |
| Tightening torque | 0.5 Nm ... 0.8 Nm |
| Screwdriver blade | 0.5 x 3.5 mm |
| Pollution degree | 3 |
| Overvoltage category | III |
| Constructional and testing regulations | DIN EN 61984 |
| DIN EN 60664 | |
| IEC 60352 | |
| Number of positions | 10+PE |
| Insertion/withdrawal cycles | ≥ 500 |
| Type | B10 |
| Connection in acc. with standard | IEC / EN |
| Conductor cross section | 0.5 mm² ... 2.5 mm² (Applies to stranded conductors with ferrules) |
| Connection cross section AWG | 20 ... 14 |
| Stripping length of the individual wire | 8 mm |
| Assembly instructions | Coding also using the CP-HC (1686478) coding profiles. HC-B6../ HC-B10..for two coding profiles. HC-B16../ HC-B24..for four coding profiles. |
| Connection | For housings of type B10. Connectors may only be actuated when there is no load/voltage. |
Ambient conditions
| Ambient temperature (operation) | -40 °C ... 125 °C (including heating up of contacts) |
|---|
Material data
| Flammability rating according to UL 94 | V0 |
|---|---|
| Contact material | Copper alloy |
| Contact surface material | Ag |
| Contact carrier material | PA |
| Standards/regulations | PA: Fire protection in rail vehicles - requirement sets R22 and R23 acc. to DIN EN 45545-2 (Risk level HL1 - HL2) |
| PA: Fire protection in rail vehicles - requirement set R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3) |
Electrical characteristics
| Rated voltage (III/3) | 500 V |
|---|---|
| Rated surge voltage | 6 kV |
| Rated current | 16 A |