View larger
HC-STA-B10-SHWSC-2SSM40-ELC-AL 1082585 PHOENIX CONTACT Box mounting bases B10, with single locking latch, ma..
HC-STA-B10-SHWSC-2SSM40-ELC-AL
1082585
PHOENIX CONTACT
1 Pcs.
Connectors > Housing for rectangular connectors
Industrial plug-in connectors/interfaces
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
This Phoenix Contact HC-STA-B10-SHWSC-2SSM40-ELC-AL housing acts as a surface mounting base designed to anchor and protect industrial connector assemblies. Base housings of this variety are commonly installed on control enclosures and machinery frames to provide secure cable entry and robust environmental sealing. Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- General: For contact inserts HC-B10, BB18, DD42, M, K8/24
- Product type: Housing with locking latch
- Housing type: Surface mounting housing
- Application: Standard
- Type: B10
- No. of cable outlets: 2
- Type of the screw connection: 2x M40
- Type: Tall design
- Protective cover: yes
- Cable outlet: lateral
- Data management status Article revision: 04
- Width: 52 mm
- Height: 74.5 mm
- Length: 92 mm
- Hole diameter: 5.5 mm
- Flammability rating according to UL 94: V0 (Interlock)
More info
▲| General | For contact inserts HC-B10, BB18, DD42, M, K8/24 |
| Product type | Housing with locking latch |
| Housing type | Surface mounting housing |
| Application | Standard |
| Type | B10 |
| No. of cable outlets | 2 |
| Type of the screw connection | 2x M40 |
| Type | Tall design |
| Protective cover | yes |
| Cable outlet | lateral |
| Pg screw connection | none |
| Data management status | |
| Article revision | 04 |
| Dimensional drawing | |
| Width | 52 mm |
| Height | 74.5 mm |
| Length | 92 mm |
| Hole diameter | 5.5 mm |
| Flammability rating according to UL 94 | V0 (Interlock) |
| V0 (Protective cover) | |
| Seal material | NBR, conductive |
| Housing material | Die-cast aluminum, salt water resistant |
| Housing surface material | uncoated |
| Material, protective cover | PC |
| Locking latch material | PA |
| Mechanical data | |
| Type of the screw connection | 2x M40 |
| Locking type | Latch |
| Tightening torque | 2 Nm ... 3 Nm (for M5 mounting screws on the surface-mount housing) |
| Assembly note | One opening is sealed with a plastic filler plug and can be opened using a screwdriver. |
| Ambient conditions | |
| Degree of protection | IP66 (with closed protective cover) |
| IP67 (when plugged in) | |
| Enclosure rating (NEMA) | 4 (UL 50e) |
| 4X (UL 50e) | |
| 12 (UL 50e) | |
| Impact strength | IK08 |
| Ambient temperature (operation) | -40 °C ... 125 °C |