View larger
Images are for illustrative purposes only. Please refer to data sheet for details
HC-M-B06-MFH-B 1182085 PHOENIX CONTACT Module Support Frame HC-M-B06-MFH-B
HC-M-B06-MFH-B
1182085
PHOENIX CONTACT
1 Pcs.
Module Support Frame - HC-M-B06-MFH-B
Frame for module support, size: B6, type: for recessed side (a, b, c, ...), 4 mm² ... 6 mm², application: Frame for module support
Module frames, dimensions: B6, design: per flush-mounted side (a, b, c, ...), 4 mm2 ... 6 mm2, application: Module frames
Connectors > Module carrier frame for industrial connectors
Industrial plug-in connectors/interfaces
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
Module support frames such as the Phoenix Contact HC-M-B06-MFH-B provide structured mounting for modular connector inserts inside industrial plug housings.
Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- General notes: This product replaces item 1417398 HC-M-B06-MF-B
- Product Type: Module frames
- Series: HC-M-B
- Application: Module frames
- type: B6
- Number of module connection points: 2
- Execution: for flush-mounted side (A, B, C, ...)
- Frame type: Module frames
- Data maintenance status Article review: 03
- Conductor connection Connection section: 4 mm² ... 6 mm² (for PE conductor - power side)
- AWG Connection Section: 12 ... 10 (for PE conductor - power side)
- Tightening torque: 0.5 Nm ... 0.8 Nm (Fixing screws for mounting in the HEAVYCON enclosure)
- width: 34.9 mm
- height: 36 mm
- length: 51 mm
- Contact Insert Material: Zinc Die Cast Alloy
More info
▲Technical data
Notes
| General notes | This product replaces item 1417398 HC-M-B06-MF-B |
Article features
| Product Type | Module frames |
| Series | HC-M-B |
| HC-M-02 | |
| HC-M-03 | |
| HC-M-03/04 | |
| HC-M-04 | |
| HC-M-05 | |
| HC-M-06 | |
| HC-M-08 | |
| HC-M-08-GBIT | |
| HC-M-12 | |
| HC-M-17 | |
| HC-M-20 | |
| HC-M-25 | |
| HC-M-DSUB | |
| HC-M-EMV | |
| HC-M-HV | |
| HC-M-HS | |
| HC-M-00 | |
| Application | Module frames |
| type | B6 |
| Number of module connection points | 2 |
| Execution | for flush-mounted side (A, B, C, ...) |
| Frame type | Module frames |
| Data maintenance status | |
| Article review | 03 |
Connection data
| Conductor connection | |
| Connection section | 4 mm² ... 6 mm² (for PE conductor - power side) |
| 1 mm² ... 2.5 mm² (For PE conductor – controller side) | |
| AWG Connection Section | 12 ... 10 (for PE conductor - power side) |
| 18 ... 14 (For PE conductor – controller side) | |
| Tightening torque | 0.5 Nm ... 0.8 Nm (Fixing screws for mounting in the HEAVYCON enclosure) |
dimensions
| Dimensioned Drawing | |
| width | 34.9 mm |
| height | 36 mm |
| length | 51 mm |
Material information
| Contact Insert Material | Zinc Die Cast Alloy |
Mechanical characteristics
| Mechanical data | |
| Manoeuvring cycles | ≥ 500 |
Environmental and electrical life conditions
| Environmental conditions | |
| Ambient temperature (operating) | -40 °C ... 125 °C |
Montage
| Mounting Note | HC-MHR-PE16 ( 1636981) for PE connection extension to 16 mm². |
| Use suitable end protectors (PE connection screws without wire protection) with PE wires, max. thread length of the screw connection 12 mm in cases without pins with side exit | |
| When inserting the module frame into metal enclosures, the connection of the PE protective conductor must be ensured via the PE connection provided on the module frame or a special metal PE module. |