View larger
HC-M-12-CT-M 1414354 PHOENIX CONTACT Module inserts contacts, Number of poles: 12, Type of contact: Male, Te..
HC-M-12-CT-M
1414354
PHOENIX CONTACT
5 Pcs.
Connectors > Contact insert for rectangular connectors
Industrial plug-in connectors/interfaces
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
Phoenix Contact module inserts contacts (part number HC-M-12-CT-M) acts as a modular connection element inside heavy-duty connector frames, providing structured pin routing for complex signal transmission networks in automation machinery.
Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- General: Connectors should only be handled when off-load/power-off.
- Assembly instructions: Intended use includes installation in a housing with an IP54 or higher protection rating.
- Product Type: Modular contact element
- Series: HC-M-12
- Application: Signal
- Number of poles: 12
- Plug-in: 12
- Contact Numbering: 1 - 12
- Number of Outlets: 1
- Number of Power Contacts: 0
- Number of control contacts: 12
- Type of contact material: Turned
- Data Management Status Revision of the article: 02
- Insulation properties Surge Category: III
- Degree of pollution: 3
- Connection technology Connection technology: Crimp connection
More info
▲| General | For HEAVYCONNEC enclosures type B6 to B48, HC-M-B module support frame... MF-... required, CK 1,6-ED crimp contacts... , crimp contacts not included in delivery. |
| General | Connectors should only be handled when off-load/power-off. |
| Assembly instructions | Intended use includes installation in a housing with an IP54 or higher protection rating. |
| Product Type | Modular contact element |
| Series | HC-M-12 |
| Application | Signal |
| Number of poles | 12 |
| Plug-in | 12 |
| Contact Numbering | 1 - 12 |
| Number of Outlets | 1 |
| Number of Power Contacts | 0 |
| Number of control contacts | 12 |
| Type of contact material | Turned |
| Rolled | |
| Data Management Status | |
| Revision of the article | 02 |
| Insulation properties | |
| Surge Category | III |
| Degree of pollution | 3 |
| Connection technology | |
| Connection technology | Crimp connection |
| Conductor connection | |
| Connectable section | 0.14 mm² ... 2.5 mm² |
| AWG Connectable Section | 26 ... 14 |
| Length of sheath to be stripped of each wire | 8 mm (6 mm to 2.5 mm²) |
| Dimensioned drawing | |
| Width | 34.2 mm |
| Height | 34 mm |
| Length | 14.6 mm |
| Mechanical characteristics | |
| Minimum Enclosure Height | 52 mm |
| Contact Diameter | 1.6 mm |
| Reference voltage (III/3) | 250 V |
| Rated shock resistance voltage | 4 kV |
| Reference current | 10 A |
| Mechanical characteristics | |
| Plugging cycles | ≥,500 |
| Flammability class according to UL 94 | V0 |
| Contact material | Copper alloy |
| Contact surface material | Ag (alternative To) |
| Contact holder material | PC |
| Standards / Specifications | PC: Fire safety in railway vehicles - Sets of requirements R22, R23 and R24 and DIN EN 45545-2 (Risk level HL1 - HL3) |
| Environmental conditions | |
| Ambient Temperature (Operating) | -40 °C ... 125 °C (including contact heating) |
| Trial | |
| Standards/requirements | PC: Fire safety in railway vehicles - Sets of requirements R22, R23 and R24 and DIN EN 45545-2 (Risk level HL1 - HL3) |