View larger
HC-M-05L-TPT-F 1423962 PHOENIX CONTACT Contact insert module
HC-M-05L-TPT-F
1423962
PHOENIX CONTACT
1 Pcs.
Connectors > Contact insert for rectangular connectors
Industrial plug-in connectors/interfaces
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
Phoenix Contact HC-M-05L-TPT-F contact insert module allows custom modular configuration within heavy-duty connector systems, facilitating organized power distribution in industrial equipment. Such modules enable mixed signal and power layouts inside standardized housing frames.
Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- General: Use only flexible conductors with ferrule (in conjunction with CRIMPFOX 6 only)
- General: Connectors may be operated only when there is no load/voltage.
- General: For HEAVYCON housing type B6 to B48, HC-M-B...MF-... module carrier frame required
- Assembly note: To ensure correct use, installation in housing with IP54 protection or better is required
- Product type: Modular contact insert
- Series: HC-M-05-T
- Application: Power
- Number of positions: 5
- Connection profile: 5
- Contact numbering: 1 - 5
- Number of connections per position: 2
- Number of module slots: 1
- No. of power contacts: 5
- No. of control contacts: 0
- Contact material type: rolled
- Data management status Article revision: 04
More info
▲| General | Use only flexible conductors with ferrule (in conjunction with CRIMPFOX 6 only) |
| General | Connectors may be operated only when there is no load/voltage. |
| General | For HEAVYCON housing type B6 to B48, HC-M-B...MF-... module carrier frame required |
| Assembly note | To ensure correct use, installation in housing with IP54 protection or better is required |
| Product type | Modular contact insert |
| Series | HC-M-05-T |
| Application | Power |
| Number of positions | 5 |
| Connection profile | 5 |
| Contact numbering | 1 - 5 |
| Number of connections per position | 2 |
| Number of module slots | 1 |
| No. of power contacts | 5 |
| No. of control contacts | 0 |
| Contact material type | rolled |
| Data management status | |
| Article revision | 04 |
| Insulation characteristics | |
| Overvoltage category | III |
| Degree of pollution | 3 |
| Connection technology | |
| Connection technology | Push-in connection |
| Number of connections per position | 2 |
| Conductor connection | |
| Conductor cross section | 0.25 mm² ... 1.5 mm² |
| Connection cross section AWG | 24 ... 16 |
| Stripping length of the individual wire | 8 mm ±1 mm |
| Dimensional drawing | |
| Width | 34 mm |
| Height | 38 mm |
| Length | 14.6 mm |
| Mechanical characteristics | |
| Contact diameter | 2.5 mm |
| Rated voltage (III/3) | 230 V (Conductor-PE) |
| 400 V (Conductor-Conductor) | |
| Rated voltage for power contacts | 230/400 V |
| Rated surge voltage | 4 kV |
| Rated current | 16 A |
| Mechanical data | |
| Insertion/withdrawal cycles | ≥ 500 |
| Flammability rating according to UL 94 | V0 |
| Contact material | Copper alloy |
| Contact surface material | Ag |
| Contact carrier material | PA |
| Standards/regulations | PA: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3) |
| Ambient conditions | |
| Ambient temperature (operation) | -40 °C ... 125 °C |
| Constructional and testing regulations | DIN EN 61984 |
| DIN EN 60664 | |
| Tests | DIN EN 61984 |
| DIN EN 60664 | |
| Testing | |
| Standards/regulations | PA: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3) |