View larger
HC-M-02-CT-M-HV-16 1417408 PHOENIX CONTACT Module inserts contacts HEAVYCON male, 2-pole, up to 5000 V, conn..
HC-M-02-CT-M-HV-16
1417408
PHOENIX CONTACT
1 Pcs.
Connectors > Contact insert for rectangular connectors
Industrial plug-in connectors/interfaces
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
Phoenix Contact HC-M-02-CT-M-HV-16 1417408 PHOENIX CONTACT Module inserts contacts HEAVYCON male, 2-pole, up to 5000 V, conn.. functions as a high-voltage module insert designed to handle demanding electrical potentials within modular industrial connector frames. It enables safe routing of high-voltage lines in heavy-duty distribution systems. Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- General: Connectors may be operated only when there is no load/voltage.
- Assembly note: To ensure correct use, installation in housing with IP54 protection or better is required
- Product type: Modular contact insert
- Series: HC-M-HV
- Application: High-voltage
- Number of positions: 2
- Connection profile: 2
- Contact numbering: I, II
- Number of module slots: 2
- No. of power contacts: 2
- No. of control contacts: 0
- Contact material type: turned
- Data management status Article revision: 04
- Insulation characteristics Overvoltage category: III
- Degree of pollution: 3
- Connection technology Connection technology: Crimp connection
More info
▲| General | For HEAVYCON housing type B6 to B48, HC-M-B...MF-... hinged module carrier frame required, CK2,5-ED... imp contacts, crimp contacts not supplied as standard. |
| General | Connectors may be operated only when there is no load/voltage. |
| Assembly note | To ensure correct use, installation in housing with IP54 protection or better is required |
| Assembly procedure: - Strip wire 9.5 mm, - connect the stripped part of the wire through the locking sleeve (for wire diameter > 3.2 mm), - crimp wire (with protracted locking sleeve) with CK2.5...ED crimp contact, - lock the locking sleeve with the crimp contact together with the module's insulating body. |
| Product type | Modular contact insert |
| Series | HC-M-HV |
| Application | High-voltage |
| Number of positions | 2 |
| Connection profile | 2 |
| Contact numbering | I, II |
| Number of module slots | 2 |
| No. of power contacts | 2 |
| No. of control contacts | 0 |
| Contact material type | turned |
| Data management status | |
| Article revision | 04 |
| Insulation characteristics | |
| Overvoltage category | III |
| Degree of pollution | 3 |
| Connection technology | |
| Connection technology | Crimp connection |
| Conductor connection | |
| Conductor cross section | 0.5 mm² ... 4 mm² |
| Connection cross section AWG | 20 ... 12 |
| Stripping length of the individual wire | 9.5 mm |
| Dimensional drawing | |
| Width | 34.1 mm |
| Height | 61.3 mm |
| Length | 29.3 mm |
| Mechanical characteristics | |
| Minimum housing height | 72 mm |
| Contact diameter | 2.5 mm |
| Rated voltage (III/3) | 2900 V (Conductor-PE) |
| 5000 V (Conductor-Conductor) | |
| Rated voltage for power contacts | 2900/5000 V |
| Rated surge voltage | 15 kV |
| Rated current | 16 A |
| Mechanical data | |
| Insertion/withdrawal cycles | ≥ 500 |
| Flammability rating according to UL 94 | V0 |
| Contact material | Copper alloy |
| Contact surface material | Ag (alternatively Au) |
| Contact carrier material | PC |
| Standards/regulations | PC: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3) |
| Ambient conditions | |
| Ambient temperature (operation) | -40 °C ... 125 °C |
| Testing | |
| Standards/regulations | PC: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3) |