View larger
HC-B10-I-TPT-F 1423018 PHOENIX CONTACT Contact insert
HC-B10-I-TPT-F
1423018
PHOENIX CONTACT
1 Pcs.
Connectors > Contact insert for rectangular connectors
Industrial plug-in connectors/interfaces
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
Utilized within rectangular heavy-duty connector housings, this Phoenix Contact HC-B10-I-TPT-F contact insert organizes and terminates multiple power conductors securely. Contact inserts provide dependable internal electrical connectivity, allowing technicians to safely connect and disconnect complex industrial wiring assemblies. Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- General: Use only flexible conductors with ferrule (in conjunction with CRIMPFOX 6 only):
- General: Connectors may be operated only when there is no load/voltage.:
- Assembly note: To ensure correct use, installation in housing with IP54 protection or better is required:
- Product type: Contact insert with a fixed no. of positions
- Series: HC-B
- Application: Power
- Type: B10
- Number of positions: 10
- Connection profile: 10+PE
- Contact numbering: 1 - 10
- Number of connections per position: 2
- Data management status Article revision: 03
- Insulation characteristics Overvoltage category: III
- Degree of pollution: 3
- Width: 34 mm
- Height: 32 mm
More info
▲| General | Use only flexible conductors with ferrule (in conjunction with CRIMPFOX 6 only) |
| General | Connectors may be operated only when there is no load/voltage. |
| Assembly note | To ensure correct use, installation in housing with IP54 protection or better is required |
| Product type | Contact insert with a fixed no. of positions |
| Series | HC-B |
| Application | Power |
| Type | B10 |
| Number of positions | 10 |
| Connection profile | 10+PE |
| Contact numbering | 1 - 10 |
| Number of connections per position | 2 |
| Data management status | |
| Article revision | 03 |
| Insulation characteristics | |
| Overvoltage category | III |
| Degree of pollution | 3 |
| Dimensional drawing | |
| Width | 34 mm |
| Height | 32 mm |
| Length | 64 mm |
| Drill hole distance, horizontal | 57 mm |
| Mechanical characteristics | |
| Contact diameter | 2.5 mm |
| Connection technology | |
| Connection technology | Push-in connection |
| Number of connections per position | 2 |
| Conductor connection | |
| Conductor cross section | 0.25 mm² ... 1.5 mm² |
| Connection cross section AWG | 24 ... 16 |
| Tightening torque | 0.8 Nm ... 1.2 Nm (PE connection) |
| 0.5 Nm ... 0.8 Nm (Mounting screws for mounting in the HEAVYCON housing) | |
| Stripping length of the individual wire | 8 mm ±1 mm |
| Rated voltage (III/3) | 500 V |
| Rated surge voltage | 6 kV |
| Rated current | 16 A |
| Mechanical data | |
| Insertion/withdrawal cycles | ≥ 500 |
| Flammability rating according to UL 94 | V0 |
| Contact material | Copper alloy |
| Contact surface material | Ag |
| Contact carrier material | PC |
| Standards/regulations | PC: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3) |
| Ambient conditions | |
| Ambient temperature (operation) | -40 °C ... 125 °C |
| Constructional and testing regulations | DIN EN 61984 |
| DIN EN 60664 | |
| IEC 60352 | |
| Tests | DIN EN 61984 |
| DIN EN 60664 | |
| IEC 60352 | |
| Testing | |
| Standards/regulations | PC: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3) |