View larger
FP 1,27/ 20-FWL 1714904 PHOENIX CONTACT Plug, IDC, rated Current to 20A °C: 1.2 A, test Voltage: 500 V AC, n..
FP 1,27/ 20-FWL
1714904
PHOENIX CONTACT
360 Pcs.
Connectors > Printed circuit board connector
PCB Connectors (PCC)
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
Functioning as an IDC female connector, the Phoenix Contact FP 1,27/ 20-FWL 1714904 PHOENIX CONTACT Plug, IDC, rated Current to 20A °C: 1.2 A, test Voltage: 500 V AC, n.. enables mass-termination of flat ribbon cables in electronic hardware. Insulation displacement connectors allow for rapid, solderless wiring harnesses in complex industrial instrumentation. Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Note on application: Please observe the application note on self-assembly in the download area.
- Product type: IDC female connector
- Product family: FR 1,27/...-FWL
- Number of positions: 20
- Pitch: 1.27 mm
- Number of rows: 2
- Number of potentials: 20
- Data management status Article revision: 01
- Nominal current I N: 1.2 A IEC 60512-5-2:2002-02 (at 20°C 50-pos.)
- Contact resistance: 10 mΩ
- Test voltage: 500 V AC IEC 60512-4-1:2003
- Conductor connection Connection method: Displacement connection
- Conductor cross section AWG: 30
- Interlock Locking type: Snap-in locking
- Mounting flange: Latching flange
- Pitch: 1.27 mm
More info
▲| Note on application | Please observe the application note on self-assembly in the download area. |
| Note regarding documentation | Current documents such as 3D models, products family drawings, data sheets or packaging drawings are available in the Download Center. |
| Notes on operation | The permissible voltage during operation depends on the application, taking into consideration the air clearances and creepage distances within the scope of insulation requirements in accordance with IEC 60664-1. |
| Product type | IDC female connector |
| Product family | FR 1,27/...-FWL |
| Number of positions | 20 |
| Pitch | 1.27 mm |
| Number of rows | 2 |
| Number of potentials | 20 |
| Data management status | |
| Article revision | 01 |
| Nominal current IN | 1.2 A IEC 60512-5-2:2002-02 (at 20°C 50-pos.) |
| Contact resistance | 10 mΩ |
| Test voltage | 500 V AC IEC 60512-4-1:2003 |
| Conductor connection | |
| Connection method | Displacement connection |
| Conductor cross section AWG | 30 |
| Interlock | |
| Locking type | Snap-in locking |
| Mounting flange | Latching flange |
| Pitch | 1.27 mm |
| Width [w] | 18.86 mm |
| Height [h] | 4.2 mm |
| Length [l] | 13.65 mm |
| Application | |
| Center offset | ± 0.7 mm in longitudinal and transverse direction |
| Angular tolerance | ± 4 ° in longitudinal direction |
| ± 2 ° in transverse direction | |
| Material data - contact | |
| Note | WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201 |
| Contact material | Cu alloy |
| Surface characteristics | Selective coating |
| Metal surface contact area (top layer) | Gold (Au) |
| Metal surface contact area (middle layer) | Nickel (Ni) Palladium nickel, (PdNi) |
| Material data - housing | |
| Color (Housing) | black (9005) |
| Insulating material | LCP |
| Insulating material group | IIIb |
| CTI according to IEC 60112 | 175 |
| Flammability rating according to UL 94 | V0 |
| Connection 1 | |
| Insulating material | LCP |
| CTI according to IEC 60112 | 175 |
| Thermal test Test group C | |
| Specification | IEC 60512-5-2:2002-02 |
| Tested number of positions | 50 |
| Insulation resistance | |
| Specification | IEC 60512-3-1:2002-02 |
| Insulation resistance, neighboring positions | ≥ 10 GΩ |
| Insertion and withdrawal forces | |
| Result | Test passed |
| No. of cycles | 500 |
| Insertion strength per pos. approx. | 0.5 N |
| Withdraw strength per pos. approx. | 0.5 N |
| Vibration test | |
| Specification | IEC 60068-2-6:2007-12 |
| Frequency | 10 - 2000 - 10 Hz |
| Sweep speed | 1 octave/min |
| Amplitude | 1.5 mm (10 Hz ... 60.1 Hz) |
| Acceleration | 20g (60.1 Hz ... 2000 Hz) |
| Test duration per axis | 2.5 h |
| Test directions | X-, Y- and Z-axis |
| Durability test | |
| Specification | IEC 60512-9-1:2010-03 (following) |
| Impulse withstand voltage at sea level | 0.8 kV |
| Contact resistance R1 | 10 mΩ |
| Contact resistance R2 | 10 mΩ |
| Insertion/withdrawal cycles | 500 |
| Insulation resistance, neighboring positions | ≥ 10 GΩ |
| Climatic test | |
| Specification | IEC 60512-11-7:2003-05 |
| Corrosive stress | Method 1, 10 days |
| Power-frequency withstand voltage | 500 V AC |
| Shocks | |
| Specification | IEC 60068-2-27:2008-02 |
| Pulse shape | Semi-sinusoidal |
| Acceleration | 50g |
| Shock duration | 11 ms |
| Test directions | X-, Y- and Z-axis (pos. and neg.) |
| Ambient conditions | |
| Ambient temperature (operation) | -55 °C ... 125 °C |
| Ambient temperature (storage/transport) | -40 °C ... 70 °C |
| Relative humidity (storage/transport) | 30 % ... 70 % |
| Ambient temperature (assembly) | -5 °C ... 100 °C |
| Type of packaging | Tray |