View larger
SACC-CI-M12FST-4CON-L180 THR 1406411 PHOENIX CONTACT Flush-type connector
SACC-CI-M12FST-4CON-L180 THR
1406411
PHOENIX CONTACT
60 Pcs.
Connectors > Contact insert for circular connectors
Field Device Connectors (FDC)
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
This Phoenix Contact flush-type connector, part number SACC-CI-M12FST-4CON-L180 THR, offers a specialized board-level interface configured for power distribution in industrial equipment. Flush-type connectors allow devices to accept external power lines directly onto internal circuit boards with high mechanical stability.
Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Product type: Contact insert
- Application: Power
- Sensor type: Power
- Number of positions: 4
- Seal present: no
- Shielded: no
- Coding: T
- Thread type: M12
- Data management status Article revision: 00
- Insulation characteristics Overvoltage category: III
- Degree of pollution: 3
- Rated surge voltage: 1.5 kV
- Contact resistance: ≤ 3 mΩ
- Insulation resistance: ≥ 100 MΩ
- Nominal voltage U N: 63 V
- Nominal current I N: 12 A
More info
▲| Notes on operation | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
| Product type | Contact insert |
| Application | Power |
| Sensor type | Power |
| Number of positions | 4 |
| Seal present | no |
| Shielded | no |
| Coding | T |
| Thread type | M12 |
| Data management status | |
| Article revision | 00 |
| Insulation characteristics | |
| Overvoltage category | III |
| Degree of pollution | 3 |
| Rated surge voltage | 1.5 kV |
| Contact resistance | ≤ 3 mΩ |
| Insulation resistance | ≥ 100 MΩ |
| Nominal voltage UN | 63 V |
| Nominal current IN | 12 A |
| Connection method | THR solder connection |
| Signal type/category | Power |
| Flammability rating according to UL 94 | V0 |
| Contact material | CuZn |
| Contact surface material | Au |
| Contact carrier material | PA 4T |
| Connection 1 | |
| Head design | Socket |
| Head cable outlet | straight |
| Head thread type | M12 |
| Coding | T |
| Signal type/category | Power |
| Mechanical data | |
| Insertion/withdrawal cycles | > 100 |
| Ambient conditions | |
| Degree of protection (when plugged in) | IP67 (correctly plugged in and locked) |
| Degree of protection | IP67 (correctly plugged in and locked) |
| IP20 (Not plugged in) | |
| IP67, when plugged in | |
| Ambient temperature (operation) | -25 °C ... 105 °C |
| -40 °C ... 105 °C (without mechanical actuation) | |
| M12 | |
| Standard designation | M12 connector |
| Mounting type | PCB mounting |
| Type of packaging | Tray |