View larger
AI 0,75-12 GY 3200849 PHOENIX CONTACT Ferrule
AI 0,75-12 GY
3200849
PHOENIX CONTACT
100 Pcs.
Cables > Cable end sleeve
Ferrules
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
Phoenix Contact AI 0,75-12 GY is a cable end sleeve used to prepare flexible conductors for secure connection inside industrial control gear and electrical distribution hubs. Using insulated ferrules minimizes installation time while safeguarding against accidental short circuits caused by stray wire strands.
Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Product type: Cable end sleeve
- Conductor category: stranded conductors, class 2, 5, 6 / B, C, K, M
- Data management status Article revision: 05
- Conductor connection Conductor cross section flexible max.: 0.75 mm²
- Conductor connection Conductor cross section AWG max.: 18
- Stripping length: 15 mm
- Sleeve length: 18 mm
- Length contact range: 12 mm
- Maximum stripping length: 15 mm
- Ferrule diameter: 1.3 mm
- Sleeve wall thickness: 0.15 mm
- Insulating collar thickness: 0.25 mm
- Inner dimensions of the insulating collar: 2.8 mm
- Color: gray (RAL 7042)
- Material: CU-DHP
- Flammability rating according to UL 94: HB
More info
▲| Product type | Cable end sleeve |
| Conductor category | stranded conductors, class 2, 5, 6 / B, C, K, M |
| Data management status | |
| Article revision | 05 |
| Conductor connection | |
| Conductor cross section flexible max. | 0.75 mm² |
| Conductor cross section AWG max. | 18 |
| Stripping length | 15 mm |
| Dimensional drawing | |
| Sleeve length | 18 mm |
| Length contact range | 12 mm |
| Maximum stripping length | 15 mm |
| Ferrule diameter | 1.3 mm |
| Sleeve wall thickness | 0.15 mm |
| Insulating collar thickness | 0.25 mm |
| Inner dimensions of the insulating collar | 2.8 mm |
| Color | gray (RAL 7042) |
| Material | CU-DHP |
| Flammability rating according to UL 94 | HB |
| Coating | tin-plated (galvanic) |
| Surface characteristics | Tin-plated |
| Components | free from silicone and halogen |
| Technical data | |
| Sleeve length | 18 mm |
| Ambient conditions | |
| Permanent temperature | 105 °C (-40 °C no load / 0 °C dynamic load) |
| Short-term temperature | 120 °C |
| Design according to standard | DIN 46228-4, UL 486F-E |