View larger
EO-J/UT/LED 0804101 PHOENIX CONTACT Socket
EO-J/UT/LED
0804101
PHOENIX CONTACT
5 Pcs.
Automation > Socket outlet for distribution board
CABINET add-on
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
Built for Swiss pin configurations, the Phoenix Contact EO-J/UT/LED socket supplies local AC power within industrial enclosures, switchboards, and automation racks. Panel-mounted electrical outlets ensure service technicians can easily plug in test tools and auxiliary devices during routine machine maintenance.
Pricing, availability, and lead time are confirmed per enquiry through an RFQ.
- Product type: Socket
- Country ID: Switzerland
- Data management status Article revision: 04
- Screw thread: M3
- Tightening torque: 0.5 ... 0.6 Nm
- Stripping length: 8 mm
- Internal cylindrical gage: A3
- Conductor cross section rigid: 0.2 mm² ... 4 mm²
- Cross section AWG: 24 ... 12 (converted acc. to IEC)
- Conductor cross section flexible: 0.25 mm² ... 2.5 mm²
- Conductor cross section, flexible [AWG]: 24 ... 14 (converted acc. to IEC)
- Nominal current: 16 A
- Nominal voltage: 250 V AC (50 Hz)
- Status display: yes
- Width: 45 mm
- Height: 75 mm
More info
▲| Product type | Socket |
| Country ID | Switzerland |
| Data management status | |
| Article revision | 04 |
| Screw thread | M3 |
| Tightening torque | 0.5 ... 0.6 Nm |
| Stripping length | 8 mm |
| Internal cylindrical gage | A3 |
| B3 | |
| Conductor cross section rigid | 0.2 mm² ... 4 mm² |
| Cross section AWG | 24 ... 12 (converted acc. to IEC) |
| Conductor cross section flexible | 0.25 mm² ... 2.5 mm² |
| Conductor cross section, flexible [AWG] | 24 ... 14 (converted acc. to IEC) |
| Conductor cross-section flexible (ferrule without plastic sleeve) | 0.25 mm² ... 2.5 mm² |
| Flexible conductor cross section (ferrule with plastic sleeve) | 0.25 mm² ... 2.5 mm² |
| Conductor cross-section flexible (2 conductors with the same cross-section, with TWIN ferrule and plastic sleeve) | 0.2 mm² ... 4 mm² |
| Nominal current | 16 A |
| Nominal voltage | 250 V AC (50 Hz) |
| Status display | yes |
| Width | 45 mm |
| Height | 75 mm |
| Depth | 75 mm |
| Color | gray (RAL 7042) |
| Flammability rating according to UL 94 | V0 |
| Insulating material | PA |
| Contact material | CuZn37 |
| Static insulating material application in cold | -60 °C |
| Relative insulation material temperature index (Elec., UL 746 B) | 130 °C |
| Fire protection for rail vehicles (DIN EN 45545-2) R22 | HL 1 - HL 3 |
| Fire protection for rail vehicles (DIN EN 45545-2) R23 | HL 1 - HL 3 |
| Fire protection for rail vehicles (DIN EN 45545-2) R24 | HL 1 - HL 3 |
| Fire protection for rail vehicles (DIN EN 45545-2) R26 | HL 1 - HL 3 |
| Surface flammability NFPA 130 (ASTM E 162) | passed |
| Specific optical density of smoke NFPA 130 (ASTM E 662) | passed |
| Smoke gas toxicity NFPA 130 (SMP 800C) | passed |
| Type of plug | Pin connector pattern type J |
| Ambient conditions | |
| Degree of protection | IP20 |
| Ambient temperature (operation) | -5 °C ... 40 °C (Average value over a period of 24 hours not above +35°C) |
| Ambient temperature (storage/transport) | -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C) |
| Permissible humidity (storage/transport) | 30 % ... 70 % |
| Standards | |
| Standards/regulations | SEV 1011 |
| Mounting type | for mounting on a DIN rail in the service interface or direct mounting |