PHOENIX CONTACT EMG 25-REL/KSR-230/2X21AU/SO46 EMG 25-REL/KSR-230/2X21AU/SO46 2964843 PHOENIX CONTACT Relay Module View larger
Images are for illustrative purposes only. Please refer to data sheet for details

EMG 25-REL/KSR-230/2X21AU/SO46 2964843 PHOENIX CONTACT Relay Module

EMG 25-REL/KSR-230/2X21AU/SO46

2964843

PHOENIX CONTACT

1 Pcs.

Relay Module Parasitic interference relay interfaces on the control side, with soldered mini-switching relays, contacts (Au): Small powers, 2 switched contacts, input voltage 230 V AC Plug-in relay interfaces for protection against interference on the control side, with soldered-in miniature switching relay, contacts (Au): small loads, 2 changeover contacts, input voltage 230 V AC

Automation > Switching relay
Industrial Relays

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.

Request Quote

Product Overview

Designed for noise mitigation, the Phoenix Contact Relay Module (part number EMG 25-REL/KSR-230/2X21AU/SO46) acts as an interface filter to prevent electrical interference from disrupting sensitive automation networks. Industrial control panels rely on such modules to isolate circuits, suppress electromagnetic disturbances, and safely bridge communication between varying voltage tiers.

Exact pricing, availability, and lead time are confirmed per enquiry through an RFQ.

  • Utilization restriction EMC note: EMC: class A product, see manufacturer's declaration in the download area
  • Product type: Relay Module
  • Product family: EMG
  • Application: Filter to prevent interference
  • Mechanical service life: approx. 2x 10 7 cycles
  • Data management status Date of last data management: 06.05.2024
  • Article revision: 04
  • Insulation characteristics Overvoltage category: III
  • Pollution degree: 2
  • Maximum power dissipation for nominal condition: 4.14 W
  • Test voltage (Winding/contact): 2.5 kV AC (50 Hz, 1 min., winding/contact)
  • Coil side Nominal input voltage U N: 230 V AC/DC
  • Input voltage range: 207 V AC/DC ... 253 V AC/DC (20 °C)
  • Drive and function: monostable
  • Drive (polarity): polarized
  • Typical input current at U N: 18 mA

More info

▲
Technical data

Notes
Utilization restriction
EMC noteEMC: class A product, see manufacturer's declaration in the download area

Product properties
Product typeRelay Module
Product familyEMG
ApplicationFilter to prevent interference
Mechanical service lifeapprox. 2x 107cycles
Data management status
Date of last data management06.05.2024
Article revision04
Insulation characteristics
Overvoltage categoryIII
Pollution degree2

Electrical properties
Maximum power dissipation for nominal condition4.14 W
Test voltage (Winding/contact)2.5 kV AC (50 Hz, 1 min., winding/contact)

Input data
Coil side
Nominal input voltage UN230 V AC/DC
Input voltage range207 V AC/DC ... 253 V AC/DC (20 °C)
Drive and functionmonostable
Drive (polarity)polarized
Typical input current at UN18 mA
Typical response time10 ms
Typical release time8 ms
Protective circuitBridge rectifier; Bridge rectifier
Surge protection; Varistor
RC element; RC element
Operating voltage displayYellow LED

Output data
Switching
Contact switching type2 changeover contacts
Type of switch contactSingle contact
Contact materialAg, gold-flashed
Maximum switching voltage24 V AC/DC
Limiting continuous current0.5 A
Maximum inrush current0.2 A
Interrupting rating (ohmic load) max.5 W
Switching: when the gold layer is destroyed
Notethe following values are applicable if a gold layer is destroyed
Maximum switching voltage250 V AC/DC
Limiting continuous current5 A

Connection data
Coil side
Connection methodScrew connection
Stripping length8 mm
Screw threadM3
Conductor cross section rigid0.2 mm² ... 4 mm²
Conductor cross section flexible0.2 mm² ... 2.5 mm²
Conductor cross section AWG24 ... 12
Contact side
Connection methodScrew connection
Stripping length8 mm
Screw threadM3
Conductor cross section rigid0.2 mm² ... 4 mm²
Conductor cross section flexible0.2 mm² ... 2.5 mm²
Conductor cross section AWG24 ... 12

Dimensions
Width25 mm
Height75 mm
Depth62.5 mm

Material specifications
Colorgreen (RAL 6021)

Environmental and real-life conditions
Ambient conditions
Ambient temperature (operation)-20 °C ... 40 °C
Ambient temperature (storage/transport)-20 °C ... 70 °C

Standards and regulations
Standards/regulationsIEC 60664
IEC 60664A
DIN VDE 0110
DIN VDE 0109-11, draft
IEC 60255/DIN VDE 0435 (in relevant parts)

Mounting
Mounting typeDIN rail mounting
Mounting positionany

Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.