View larger
E-WM (EX15)R YE 1233941 PHOENIX CONTACT Marking foil, Roll, yellow, unlabeled, labelable with: THERMOMARK E...
E-WM (EX15)R YE
1233941
PHOENIX CONTACT
1 Pcs.
Cables > Cable coding system
MS Material
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
Phoenix Contact E-WM (EX15)R YE marking foil is a roll-based labeling material used to generate durable, custom-printed wraps for wire and cable identification. High-quality marking foils resist environmental degradation to ensure long-term circuit legibility in industrial plants. Pricing, availability, and lead time are confirmed per enquiry through an RFQ.
- Product Type: Marking of conductors
- Scouting Marking technology: Heat Transfer for Rollers
- AWG conductor section: (conversion to IEC)
- Width: 14.8 mm
- Roll Length: 90.00 m
- Colours: yellow
- Material: PET + thermoplastic hot melt glue
- Components: Silicone and halogen-free
- Outer diameter of the cable: 1.8 mm ... 5.6 mm
- Result: Successful test
- Requirement: ≥ 5 N
- Result: Successful test
- Scotch Tape Trial Control Specification: (Based on the standard) DIN EN ISO 2409:2013
- Result: Successful test
- UV resistance Control Specification: (Based on the standard) DIN EN ISO 4892-2:2013-06
- Result: Successful test
More info
▲| Product Type | Marking of conductors |
| Scouting | |
| Marking technology | Heat Transfer for Rollers |
| AWG conductor section | (conversion to IEC) |
| Width | 14.8 mm |
| Roll Length | 90.00 m |
| Colours | yellow |
| Material | PET + thermoplastic hot melt glue |
| Components | Silicone and halogen-free |
| Outer diameter of the cable | 1.8 mm ... 5.6 mm |
| Checking for materials that may affect lacquer adhesion | |
| Control of materials that may affect the dispersion of the lacquer (LABS compliance) | VW PV 3.10.7:2005-02 |
| Result | Successful test |
| Scratch test to determine scratch resistance | |
| Control Specification | (Based on the standard) DIN EN ISO 1518-1:2019-10 |
| Requirement | ≥ 5 N |
| Result | Successful test |
| Scotch Tape Trial | |
| Control Specification | (Based on the standard) DIN EN ISO 2409:2013 |
| Result | Successful test |
| UV resistance | |
| Control Specification | (Based on the standard) DIN EN ISO 4892-2:2013-06 |
| Result | Successful test |
| Duration of the inspection | 96 h |
| Method | Artificial radiation with xenon arc lamps |
| Temperature storage | |
| Control Specification | DIN EN 60068-2-2 (VDE 0468-2-2):2008-05 |
| Result | Successful test |
| Duration | 96 h |
| Control Temperature | 80 °C |
| Saturated atmosphere test with sulphur dioxide atmosphere | |
| Control Specification | DIN 50018:2013-05 |
| Result | Successful test |
| Climatic degree | AHT 1.0 S |
| Cycles | 2 |
| Salt spray test | |
| Control Specification | DIN EN 60068-2-11:2000-02 |
| Result | Successful test |
| Duration of the inspection | 96 h |
| Environmental conditions | |
| Ambient Temperature (Operating) | -40 °C ... 80 °C |
| Recommended ambient temperature (storage/transport) | 23 °C |
| Recommended humidity (storage/transport) | 50 % |
| Conservation faculty | 1 year |
| Mounting Type | Weld |