View larger
ME 17,5 TBUS 1,5/4P1S KMGY 2201731 PHOENIX CONTACT DIN rail bus connectors
ME 17,5 TBUS 1,5/4P1S KMGY
2201731
PHOENIX CONTACT
50 Pcs.
Connectors > Printed circuit board connector
Housing (HS)
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
The Phoenix Contact ME 17,5 TBUS 1,5/4P1S KMGY DIN rail bus connector facilitates modular power and data bridging across multiple DIN rail mounted devices in control cabinets. These bus connectors eliminate external jumper wiring by transmitting signals along the rail profile directly. Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Recommendation: Recommendation: Material of contact pads for bus connector, galvanic gold (hard gold)
- Product type: Product type: DIN rail connector
- Product family: Product family: TBUS5-17,5..
- Number of positions: Number of positions: 5
- Pitch: Pitch: 3.81 mm
- Data management status Article revision: Data management status Article revision: 04
- Nominal current I N: Nominal current I N: 8 A (parallel contacts)
- Nominal voltage U N: Nominal voltage U N: 50 V
- Contact resistance: Contact resistance: 4.4 mΩ
- Rated voltage (III/2): Rated voltage (III/2): 50 V
- Rated surge voltage (III/2): Rated surge voltage (III/2): 0.8 kV
- Rated voltage (II/2): Rated voltage (II/2): 50 V
- Rated surge voltage (II/2): Rated surge voltage (II/2): 0.5 kV
- Material data - contact Contact material: Material data - contact Contact material: Cu alloy
- Surface characteristics: Surface characteristics: gold-plated
- Material data - housing Color (Housing): Material data - housing Color (Housing): light gray (7035)
More info
▲| Recommendation | Material of contact pads for bus connector, galvanic gold (hard gold) |
| Product type | DIN rail connector |
| Product family | TBUS5-17,5.. |
| Number of positions | 5 |
| Pitch | 3.81 mm |
| Data management status | |
| Article revision | 04 |
| Nominal current IN | 8 A (parallel contacts) |
| Nominal voltage UN | 50 V |
| Contact resistance | 4.4 mΩ |
| Rated voltage (III/2) | 50 V |
| Rated surge voltage (III/2) | 0.8 kV |
| Rated voltage (II/2) | 50 V |
| Rated surge voltage (II/2) | 0.5 kV |
| Material data - contact | |
| Contact material | Cu alloy |
| Surface characteristics | gold-plated |
| Material data - housing | |
| Color (Housing) | light gray (7035) |
| Insulating material | PA |
| Insulating material group | I |
| CTI according to IEC 60112 | 600 |
| Flammability rating according to UL 94 | V0 |
| material specifications - connector | |
| Color () | () |
| Pitch | 3.81 mm |
| Width [w] | 24.2 mm |
| Height [h] | 36.3 mm |
| Length [l] | 20.45 mm |
| Mounting type | DIN rail mounting |
| Insertion and withdrawal forces | |
| Result | Test passed |
| No. of cycles | 25 |
| Insertion strength per pos. approx. | 6 N |
| Withdraw strength per pos. approx. | 5 N |
| Contact holder in insert | |
| Specification | IEC 60512-15-1:2008-05 |
| Contact holder in insert Requirements >20 N | Test passed |
| Polarization and coding | |
| Specification | IEC 60512-13-5:2006-02 |
| Result | Test passed |
| Visual inspection | |
| Specification | IEC 60512-1-1:2002-02 |
| Result | Test passed |
| Dimension check | |
| Specification | IEC 60512-1-2:2002-02 |
| Result | Test passed |
| Vibration test | |
| Specification | IEC 60068-2-6:2007-12 |
| Frequency | 10 - 150 - 10 Hz |
| Sweep speed | 1 octave/min |
| Amplitude | 0.35 mm (10 Hz ... 60.1 Hz) |
| Acceleration | 5g (60.1 Hz ... 500 Hz) |
| Test duration per axis | 2.5 h |
| Test directions | X-, Y- and Z-axis (pos. and neg.) |
| Durability test | |
| Specification | IEC 60512-9-1:2010-03 |
| Impulse withstand voltage at sea level | 2.95 kV |
| Contact resistance R1 | 4.4 mΩ |
| Contact resistance R2 | 4.5 mΩ |
| Insertion/withdrawal cycles | 25 |
| Climatic test | |
| Specification | ISO 6988:1985-02 |
| Corrosive stress | 0.2 dm3SO2on 300 dm3/40 °C/1 cycle |
| Thermal stress | 100 °C/168 h |
| Power-frequency withstand voltage | 1.39 kV |
| Glow-wire test | |
| Specification | IEC 60695-2-10:2013-04 |
| Temperature | 850 °C |
| Time of exposure | 30 s |
| Shocks | |
| Specification | IEC 60068-2-27:2008-02 |
| Pulse shape | Semi-sinusoidal |
| Acceleration | 15g |
| Shock duration | 11 ms |
| Test directions | X-, Y- and Z-axis (pos. and neg.) |
| Ambient conditions | |
| Ambient temperature (operation) | -40 °C ... 105 °C (dependent on the derating curve) |
| Ambient temperature (storage/transport) | -40 °C ... 55 °C |
| Relative humidity (storage/transport) | 30 % ... 70 % |
| Ambient temperature (assembly) | -5 °C ... 100 °C |
| Thermal test Test group C | |
| Specification | IEC 60512-5-1:2002-02 |
| Tested number of positions | 5 |
| Air clearances and creepage distances | |
| Specification | IEC 60664-1:2007-04 |
| Insulating material group | I |
| Rated insulation voltage (III/2) | 50 V |
| Rated surge voltage (III/2) | 0.8 kV |
| minimum clearance value - non-homogenous field (III/2) | 0.2 mm |
| minimum creepage distance (III/2) | 0.6 mm |
| Rated insulation voltage (II/2) | 50 V |
| Rated surge voltage (II/2) | 0.5 kV |
| minimum clearance value - non-homogenous field (II/2) | 0.2 mm |
| minimum creepage distance (II/2) | 0.6 mm |
| Type of packaging | packed in cardboard |
| Outer packaging type | Carton |