PHOENIX CONTACT CA-12P1N8A6Y00 CA-12P1N8A6Y00 1619862 PHOENIX CONTACT Device connector, front mounting View larger
Images are for illustrative purposes only. Please refer to data sheet for details

CA-12P1N8A6Y00 1619862 PHOENIX CONTACT Device connector, front mounting

CA-12P1N8A6Y00

1619862

PHOENIX CONTACT

1 Pcs.

Device connector, front mounting M23, Conect. plug. to be apar. front wall, AC, straight, shielded: yes, for standard lock and SPEEDCON, No. of poles: 12, Rotation direction: Standard, contact type: Male, Crimped connection, Axial joint, Central fixing M20 x 1.5, coding:N M23, Device connector front mounting, series: CA, straight, shielded: yes, for standard and SPEEDCON interlock, No. of pos.: 12, Direction of rotation: Standard, contact connection type: Pin, Crimp connection, Axial seal, Central fastening M20 x 1.5, coding: N

Cables > Circular connector, mounting (without cable)
Field Device Connectors (FDC)

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.

Request Quote

Product Overview

The Phoenix Contact CA-12P1N8A6Y00 is a device connector, front mounting designed for high-density signal distribution across industrial control panels and automation equipment. Front-mounting circular connectors provide stable, panel-sealed connection points for multi-wire control harnesses.

Pricing, availability and lead time are confirmed per enquiry through an RFQ.

  • Order information:: Order 12 x 1 mm crimp contacts separately
  • Product type: Circular connectors (device side)
  • Data management status Article revision: 05
  • Insulating body Note: Order information: Order crimp contacts Ø 1 mm separately
  • Coding: N
  • Insulation body material: PA 6.6
  • Connection method: Crimp connection
  • Contact switching type: Pin
  • Application: Signal
  • Number of positions: 12
  • Direction of rotation: Standard
  • Connection profile: 12
  • Contact diameter Signal contacts: 1 mm
  • Litz wire cross-section Signal contacts min.: 0.08 mm²
  • Litz wire cross-section Signal contacts max.: 1 mm²
  • Nominal current per signal contact: 8 A

More info

▲
Technical data

Notes
Order information:Order 12 x 1 mm crimp contacts separately

Product properties
Product typeCircular connectors (device side)
Data management status
Article revision05

Connector
Insulating body
NoteOrder information: Order crimp contacts Ø 1 mm separately
CodingN
Insulation body materialPA 6.6
Connection methodCrimp connection
Contact switching typePin
ApplicationSignal
Number of positions12
Direction of rotationStandard
Connection profile12
Contact diameterSignal contacts1 mm
Litz wire cross-sectionSignal contactsmin.0.08 mm²
Litz wire cross-sectionSignal contactsmax.1 mm²
Nominal current per signal contact8 A
Rated voltage Signal contact48 V AC
Rated surge voltage1.5 kV
Overvoltage categoryIII
Degree of pollution3
Housing
Order information:If necessary, order locking nut separately
Housing materialGD-Zn
Type of lockingfor standard and SPEEDCON interlock
Pg screw connectionnone
Degree of protection (plugged in)IP67
Thread typeM23

Environmental and real-life conditions
Ambient conditions
Ambient temperature (operation)-40 °C ... 125 °C
Ambient temperature (storage/transport)15 °C ... 25 °C
Permissible humidity (storage/transport)50 % ... 65 %

Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.