PHOENIX CONTACT CA-12P1N122S00 CA-12P1N122S00 1619968 PHOENIX CONTACT Device connector, front mounting View larger
Images are for illustrative purposes only. Please refer to data sheet for details

CA-12P1N122S00 1619968 PHOENIX CONTACT Device connector, front mounting

CA-12P1N122S00

1619968

PHOENIX CONTACT

1 Pcs.

Device connector, front mounting M23, Conect. plug. to be apar. front wall, AC, straight, shielded: yes, for standard lock and SPEEDCON, No. of poles: 12, Direction of rotation: Standard, contact type: Male, Weld connection, Flat joint, 4x Ø 3.2, flange size: 25 mm x 25 mm, coding:N, Alternative product according to RoHS II without exception 6c (Pb< 0.1%) item code: 1243925 M23, Device connector front mounting, series: CA, straight, shielded: yes, for standard and SPEEDCON interlock, No. of pos.: 12, Direction of rotation: Standard, contact connection type: Pin, Solder connection, Flat gasket, 4x Ø 3.2, flange dimensions: 25 mm x 25 mm, coding: N, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1243925

Cables > Circular connector, mounting (without cable)
Field Device Connectors (FDC)

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.

Request Quote

Product Overview

The Phoenix Contact CA-09P1N122S00 device connector, front mounting (listed under CA-12P1N122S00 specifications) provides an efficient front-panel termination receptacle for automated control systems and signaling circuits. Industrial automation setups use front-mounting circular connectors to establish organized connection points for sensors, actuators, and modular instrumentation.

Pricing, availability and lead time are confirmed per enquiry through an RFQ.

  • Product type: Circular connectors (device side)
  • Data management status Article revision: 08
  • Insulating body Coding: N
  • Insulation body material: PBT
  • Contact material: CuZn
  • Contact surface material: Ni/Au
  • Insertion/withdrawal cycles: 100
  • Connection method: Solder connection
  • Contact switching type: Pin
  • Application: Signal
  • Number of positions: 12
  • Direction of rotation: Standard
  • Connection profile: 12
  • Rated voltage: 48 V AC
  • Rated surge voltage: 1.5 kV
  • Overvoltage category: III

More info

▲
Technical data

Product properties
Product typeCircular connectors (device side)
Data management status
Article revision08

Connector
Insulating body
CodingN
Insulation body materialPBT
Contact materialCuZn
Contact surface materialNi/Au
Insertion/withdrawal cycles100
Connection methodSolder connection
Contact switching typePin
ApplicationSignal
Number of positions12
Direction of rotationStandard
Connection profile12
Rated voltage48 V AC
74 V DC
Rated surge voltage1.5 kV
Overvoltage categoryIII
Degree of pollution3
Contact diameterSignal contacts1 mm
Litz wire cross-sectionSignal contactsmax.1 mm²
Nominal current per signal contact8 A
Housing
Housing materialGD-Zn
Flange dimensions25 mm x 25 mm
Type of lockingfor standard and SPEEDCON interlock
Pg screw connectionnone
Degree of protection (plugged in)IP67
Thread typeM23

Environmental and real-life conditions
Ambient conditions
Ambient temperature (operation)-40 °C ... 125 °C

Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.