View larger
Images are for illustrative purposes only. Please refer to data sheet for details
SUBCON-PLUS 9/F 2744241 PHOENIX CONTACT D-SUB bus connector
SUBCON-PLUS 9/F
2744241
PHOENIX CONTACT
1 Pcs.
D-SUB bus connector
D-SUB connector, 9-pole female connector, two cable entries under 35°, universal model for all systems, pin occupancy: 1, 2, 3, 4, 5, 6, 7, 8, 9 on a screw connection terminal
D-SUB connector, 9-pos. female connector, two 35° cable entries, universal type for all systems, pin assignment: 1, 2, 3, 4, 5, 6, 7, 8, 9 to one screw connection terminal block
Connectors > D-Sub connector
Safety
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
The Phoenix Contact SUBCON-PLUS 9/F D-SUB bus connector provides dependable screw-terminal connectivity for serial communication lines in industrial automation networks. Field bus connectors allow technicians to route and terminate data cables directly at control devices without specialized soldering tools.
Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Utilization restriction CCCex note: Use in potentially explosive areas is not permitted in China.
- Product type: Data plug
- MTTF: 6706 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
- Pin assignment: All connections are 1:1 on the screw terminal block
- Data management status Article revision: 09
- Nominal voltage U N: 50 V DC
- Nominal current I N: 100 mA
- Transmission medium: Copper
- D-SUB connection Connection method: D-SUB socket
- PCB connection Connection method: Screw connection
- Stripping length: 5 mm
- Conductor cross section, rigid min.: 0.14 mm²
- Conductor cross section, rigid max.: 1.5 mm²
- Conductor cross section flexible min.: 0.14 mm²
- Conductor cross section flexible max.: 1 mm²
- Single-wire/terminal point, rigid AWG min.: 26
More info
▲Technical data
Notes
| Utilization restriction | |
| CCCex note | Use in potentially explosive areas is not permitted in China. |
Product properties
| Product type | Data plug |
| MTTF | 6706 Years (SN 29500 standard, temperature 25°C, operating cycle 21%) |
| 1817 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%) | |
| 155 Years (SN 29500 standard, temperature 40°C, operating cycle 100%) | |
| Pin assignment | All connections are 1:1 on the screw terminal block |
| Data management status | |
| Article revision | 09 |
Electrical properties
| Nominal voltage UN | 50 V DC |
| Nominal current IN | 100 mA |
| Transmission medium | Copper |
Connection data
| D-SUB connection | |
| Connection method | D-SUB socket |
| PCB connection | |
| Connection method | Screw connection |
| Stripping length | 5 mm |
| Conductor cross section, rigid min. | 0.14 mm² |
| Conductor cross section, rigid max. | 1.5 mm² |
| Conductor cross section flexible min. | 0.14 mm² |
| Conductor cross section flexible max. | 1 mm² |
| Single-wire/terminal point, rigid AWG min. | 26 |
| Single-wire/terminal point, rigid AWG max. | 16 |
| Min. AWG conductor cross section, flexible | 26 |
| Max. AWG conductor cross section, flexible | 18 |
Interfaces
| Bus system | Universal type for all systems |
| Signal | RS-485 |
| RS-232 | |
| RS-422 |
Dimensions
| Dimensional drawing | |
| Width | 16 mm |
| Height | 44 mm |
| Length | 60 mm |
Material specifications
| Material (Housing) | ABS (metal-plated) |
Cable/line
| External cable diameter | 6 mm ... 10 mm (Incoming bus line) |
Mechanical properties
| Mechanical data | |
| Insertion/withdrawal cycles | > 200 |
Environmental and real-life conditions
| Ambient conditions | |
| Degree of protection | IP20 |
| Ambient temperature (operation) | -20 °C ... 75 °C |
| Ambient temperature (storage/transport) | -25 °C ... 80 °C |
| Altitude | ≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation) |
| Permissible humidity (operation) | 10 % ... 95 % (non-condensing) |
| Permissible humidity (storage/transport) | 5 % ... 95 % (non-condensing) |
Approvals
| ATEX | |
| Identification | II 3 G Ex ec IIC T4 Gc |
| Certificate | PxCIF15ATEX2744241X |
| Note | Please follow the special installation instructions in the documentation! |
| Corrosive gas test | |
| Identification | ISA-S71.04-1985 G3 Harsh Group A |
Standards and regulations
| Free from substances that could impair the application of coating | VDMA 24364:2018-05 |