View larger
MINI MCR-SL-CVS-24-5-10-NC 2902822 PHOENIX CONTACT Constant voltage source, input voltage 9.6 30 V DC, outpu..
MINI MCR-SL-CVS-24-5-10-NC
2902822
PHOENIX CONTACT
1 Pcs.
Automation > Accessories/spare parts for low-voltage switch technology
INTERFACE Components (IF)
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
Acting as a constant voltage source, the Phoenix Contact MINI MCR-SL-CVS-24-5-10-NC conditions and stabilizes direct current signals in industrial automation loops. Signal conditioners and voltage sources are typically installed in control cabinets to ensure sensors and measurement instruments receive steady excitation voltages.
Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Accessory (EF013236): Yes
- Spare part (EF013237): No
More info
▲Product description
The 6.2 mm wide configurable MINI MCR-SL-CVS-24-10-5 constant voltage source is used to generate high precision constant voltages.
The input voltage can fall between 9.6 V DC and 30 V DC.
The DIP switches accessible from the side of the housing enable configuration of the 10 V DC, 5 V DC, 7.5 V DC, and 2.5 V DC output voltages.
The input voltage can be applied either via connection terminal blocks on the modules or in conjunction with the DIN rail connector.
Dimensions
| Width | 6.2 mm |
|---|---|
| Height | 93.1 mm |
| Depth | 102.5 mm |
Ambient conditions
| Ambient temperature (operation) | -20 °C ... 65 °C |
|---|---|
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Degree of protection | IP20 |
Input data
| Voltage input signal | 9.6 V DC ... 30 V DC |
|---|
Output data
| Configurable/programmable | Yes, preconfigured |
|---|---|
| Max. output voltage | 10 V DC |
| 7.5 V DC | |
| 5 V DC | |
| 2.5 V DC | |
| Output current | ≤ 30 mA |
| Short-circuit current | approx. 32 mA |
Power supply
| Nominal supply voltage | 24 V DC |
|---|---|
| Supply voltage range | 9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715)) |
| Max. current consumption | < 25 mA (10 V output with 30 mA load at 24 V DC IN) |
| < 65 mA (10 V output with 30 mA load at 9.6 V DC IN) | |
| < 50 mA (10 V voltage output with 30 mA load at 12 V DC IN) | |
| < 20 mA (10 V voltage output with 30 mA load at 30 V DC IN) | |
| Power consumption | < 600 mW (at 24 V IN) |
| < 624 mW (at 9.6 V IN) | |
| < 564 mW (At 12 V IN) | |
| < 540 mW (at 30 V IN) |
Connection data
| Connection method | Screw connection |
|---|---|
| Conductor cross section solid min. | 0.2 mm² |
| Conductor cross section solid max. | 2.5 mm² |
| Conductor cross section AWG min. | 26 |
| Conductor cross section AWG max. | 12 |
| Conductor cross section flexible min. | 0.2 mm² |
| Conductor cross section flexible max. | 2.5 mm² |
| Stripping length | 12 mm |
| Screw thread | M3 |
General
| Maximum transmission error | ≤ 0.1 % (of final value) |
|---|---|
| ≤ 0.5 % (Without adjustment) | |
| Maximum temperature coefficient | < 0.01 %/K |
| Temperature coefficient, typical | < 0.002 %/K |
| Setting range comparison | ± 300 mV |
| Electrical isolation | Basic insulation according to EN 61010 |
| Overvoltage category | II |
| Pollution degree | 2 |
| Rated insulation voltage | 50 V AC/DC |
| Test voltage input/output | 1.5 kV (50 Hz, 1 min.) |
| Electromagnetic compatibility | Conformance with EMC Directive 2004/108/EC |
| Noise emission | EN 61000-6-4 |
| Noise immunity | EN 61000-6-2 When being exposed to interference, there may be minimal deviations. |
| Color | green |
| Housing material | PBT |
| Mounting position | any |
| Assembly instructions | The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715. |
| Conformance | CE-compliant |
| ATEX | Ex II 3 G Ex nA IIC T4 Gc X |
| UL, USA / Canada | UL 508 Listed |
| Class I, Div. 2, Groups A, B, C, D T6 | |
| Class I, Zone 2, Group IIC | |
| Certificate of classification | DNV GL 14085-15HH |