View larger
SACC-VB-3CON-M12/CI-1L-SV 110V 1452301 PHOENIX CONTACT Valve connectors
SACC-VB-3CON-M12/CI-1L-SV 110V
1452301
PHOENIX CONTACT
1 Pcs.
Automation > Sensor actuator adapter
QUICKON Installation System (QPD)
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
Valve connectors such as this SACC-VB-3CON-M12/CI-1L-SV 110V 1452301 PHOENIX CONTACT unit provide standardized electrical interfaces for pneumatic valves, solenoids, and hydraulic actuators in automated machinery. They ensure secure power and control signal transmission directly to field devices while protecting terminals from environmental hazards. Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Product type: Valve connectors
- Sensor type: Universal
- Number of positions: 3
- No. of cable outlets: 1
- Shielded: no
- Pg screw connection: M12
- Data management status Article revision: 02
- Insulation characteristics Overvoltage category: II
- Degree of pollution: 3
- Flammability rating according to UL 94: HB
- Seal material: NBR
- Material housing valve plug: PA
- Contact material: CuZn
- Contact surface material: CuSn
- Width: 16 mm
- Height: 27.5 mm
More info
▲| Assembly note | NOTE:Observe the permissible bending radii when routing cables, since the degree of protection may be at risk if the bending forces are too high. Reduce mechanical loads upstream of the connector, e.g., by using cable ties. |
| Product type | Valve connectors |
| Sensor type | Universal |
| Number of positions | 3 |
| No. of cable outlets | 1 |
| Shielded | no |
| Pg screw connection | M12 |
| Data management status | |
| Article revision | 02 |
| Insulation characteristics | |
| Overvoltage category | II |
| Degree of pollution | 3 |
| Flammability rating according to UL 94 | HB |
| Seal material | NBR |
| Material housing valve plug | PA |
| Contact material | CuZn |
| Contact surface material | CuSn |
| Dimensional drawing | |
| Width | 16 mm |
| Height | 27.5 mm |
| Length | 26.8 mm |
| External dimensions | |
| Outside diameter | 4 mm ... 6 mm |
| Contact resistance | ≤ 4 mΩ |
| Insulation resistance | > 2 GΩ |
| Nominal voltage UN | 110 V AC |
| 110 V DC | |
| Nominal current IN | 1.5 A |
| Protective circuit | Surge protection; Varistor |
| Valve connector characteristics | |
| Fixing screws | M3 x 27 |
| Mechanical data | |
| Insertion/withdrawal cycles | 50 (Valve connector) |
| Status display | LED (yellow) |
| Status display present | Yes |
| Connection method | Screw connection |
| Conductor cross section | 0.25 mm² ... 0.5 mm² |
| Connection cross section AWG | 24 ... 20 |
| Tightening torque | 1.6 Nm ±0.2 Nm (Pressure screw) |
| 0.4 Nm ±0.1 Nm (Central screw) | |
| 0.2 Nm ±0.1 Nm (Contact screw) |
| Connection 1 | |
| Head design | Valve connector |
| Head thread type | CI (9.4 mm) |
| Ambient conditions | |
| Degree of protection | IP65 |
| Ambient temperature (operation) | -25 °C ... 60 °C (valve plug) |