View larger
SACC-DSIV-M12FSB-5CON-L180 SH 1437180 PHOENIX CONTACT Flush-type connector
SACC-DSIV-M12FSB-5CON-L180 SH
1437180
PHOENIX CONTACT
60 Pcs.
Connectors > Circular connector, mounting (PCB)
Field Device Connectors (FDC)
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
Designed with B-coding and a robust nickel-plated brass screw connection, the Phoenix Contact SACC-DSIV-M12FSB-5CON-L180 SH 1437180 flush-type connector provides reliable fieldbus integration. Shielded circular connectors prevent electromagnetic disruptions from impacting sensitive communication links in automated production lines.
Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Mounting type: Rear mounting M12 x 1 With locking nut
- Assembly note: With locking nut
- Product type: Circular connectors (device side)
- Number of positions: 5
- Shielded: yes
- Coding: B
- Thread type: M12
- Data management status Article revision: 02
- Insulation characteristics Overvoltage category: II
- Degree of pollution: 3
- Flammability rating according to UL 94: HB
- Seal material: NBR
- Contact material: CuZn
- Contact surface material: Ni/Au
- Contact carrier material: PA 6.6
- Material for screw connection: Brass, nickel-plated
More info
▲| Notes on operation | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
| Mounting type | Rear mounting M12 x 1 With locking nut |
| Assembly note | With locking nut |
| Product type | Circular connectors (device side) |
| Number of positions | 5 |
| Shielded | yes |
| Coding | B |
| Thread type | M12 |
| Data management status | |
| Article revision | 02 |
| Insulation characteristics | |
| Overvoltage category | II |
| Degree of pollution | 3 |
| Flammability rating according to UL 94 | HB |
| Seal material | NBR |
| Contact material | CuZn |
| Contact surface material | Ni/Au |
| Contact carrier material | PA 6.6 |
| Material for screw connection | Brass, nickel-plated |
| Rated surge voltage | 1.5 kV |
| Contact resistance | ≤ 3 mΩ |
| Insulation resistance | ≥ 100 MΩ |
| Nominal voltage UN | 60 V |
| Nominal current IN | 4 A |
| Conductor connection | |
| Connection method | Solder pins |
| Contact connection type | Socket |
| Tightening torque | 1 Nm ... 1.5 Nm (Installation-side) |
| Mechanical data | |
| Insertion/withdrawal cycles | > 100 |
| Connection 1 | |
| Head design | Socket |
| Head cable outlet | straight |
| Head thread type | M12 |
| Coding | B |
| Ambient temperature (operation) | -40 °C ... 85 °C (cable, fixed installation) |
| -25 °C ... 85 °C (Cable, flexible installation) |
| Ambient conditions | |
| Degree of protection | IP67 |
| IP67 | |
| Ambient temperature (operation) | -25 °C ... 85 °C (Plug / socket) |
| -40 °C ... 85 °C (without mechanical actuation) | |
| -25 °C ... 85 °C (Cable, flexible installation) | |
| -40 °C ... 85 °C (cable, fixed installation) | |
| M12 | |
| Standard designation | M12 connector |
| Standards/specifications | IEC 61076-2-101 |