View larger
SACC-DSI-M8FS-6CON-M10-L90 SH 1424243 PHOENIX CONTACT Flush-type connector
SACC-DSI-M8FS-6CON-M10-L90 SH
1424243
PHOENIX CONTACT
20 Pcs.
Connectors > Circular connector, mounting (PCB)
Field Device Connectors (FDC)
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
Equipped for secure bulkhead mounting, the Phoenix Contact SACC-DSI-M8FS-6CON-M10-L90 SH 1424243 PHOENIX CONTACT Flush-type connector enables reliable shielded signal transfer for machine controls. These specialized circular connectors link internal electronics to external sensor feeds while protecting sensitive communication lines from electromagnetic interference.
Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Mounting type: Rear mounting M10 With flat nut
- Assembly note: With flat nut
- Product type: Circular connectors (device side)
- Number of positions: 6
- Shielded: yes
- Coding: A
- Thread type: M8
- Data management status Article revision: 03
- Insulation characteristics Overvoltage category: II
- Degree of pollution: 3
- Flammability rating according to UL 94: HB
- Seal material: NBR
- Contact material: Cu alloy
- Contact surface material: Au
- Contact carrier material: PA 6.6
- Material for screw connection: Zinc die-cast, nickel-plated
More info
▲| Mounting type | Rear mounting M10 With flat nut |
| Assembly note | With flat nut |
| Product type | Circular connectors (device side) |
| Number of positions | 6 |
| Shielded | yes |
| Coding | A |
| Thread type | M8 |
| Data management status | |
| Article revision | 03 |
| Insulation characteristics | |
| Overvoltage category | II |
| Degree of pollution | 3 |
| Flammability rating according to UL 94 | HB |
| Seal material | NBR |
| Contact material | Cu alloy |
| Contact surface material | Au |
| Contact carrier material | PA 6.6 |
| Material for screw connection | Zinc die-cast, nickel-plated |
| Rated surge voltage | 0.8 kV |
| Contact resistance | ≤ 3 mΩ |
| Insulation resistance | ≥ 100 MΩ |
| Nominal voltage UN | 30 V AC |
| 30 V DC | |
| Nominal current IN | 1.5 A |
| Conductor connection | |
| Connection method | Solder pins |
| Contact connection type | Socket |
| Tightening torque | 1 Nm ... 1.5 Nm (Installation-side) |
| Mechanical data | |
| Insertion/withdrawal cycles | > 100 |
| Connection 1 | |
| Head design | Socket |
| Head cable outlet | angled |
| Head thread type | M8 |
| Ambient conditions | |
| Degree of protection | IP67 |
| IP67 | |
| Ambient temperature (operation) | -40 °C ... 85 °C |
| -25 °C ... 85 °C | |
| M8 | |
| Standard designation | M8 connector |
| Standards/specifications | IEC 61076-2-104 |