View larger
SACC-DSI-M12FS-5CON-L180PSCUP 1436314 PHOENIX CONTACT Flush-type connector
SACC-DSI-M12FS-5CON-L180PSCUP
1436314
PHOENIX CONTACT
20 Pcs.
Cables > Circular connector, mounting (without cable)
Field Device Connectors (FDC)
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
Designed for back wall integration, the SACC-DSI-M12FS-5CON-L180PSCUP 1436314 PHOENIX CONTACT Flush-type connector serves as a compact interface point for sensor and actuator cabling in automated machinery. Flush-type connectors are heavily utilized to integrate standardized communication ports directly into device housings and control enclosures. Pricing, availability, and lead time are confirmed per enquiry through an RFQ.
- Type of plug-in contact, outer side (EF005528): Female (bus)
- Mounting method (EF000003): Back wall mounting
- Screw-in thread (EF012303): PG9
- With shield connection (EF002535): No
- Number of poles (EF001391): 5
- Number of control contacts (EF012217): 5
- With PE-connection (EF005600): No
- Min. number of insertion cycles (EF012212): 100
- Degree of protection (IP), mounted (EF007466): IP67
- Ambient temperature (EF002386): 85 °C
- Operating temperature (EF002393): -25 °C
- Rated current In (EF008250): 4 A
- With thread (EF003723): Yes
More info
▲Key Commercial Data
| Orderkey | 1436314 |
|---|---|
| Packing unit | 20 pc |
| Minimum order quantity | 20 pc |
| Note | Made to Order (non-returnable) |
| Catalog page | Page 263 (C-2-2013) |
| GTIN | 4046356438285 |
| Weight per Piece (excluding packing) | 6.530 g |
| Custom tariff number | 85366990 |
| Country of origin | DE (Germany) |
Ambient conditions
| Ambient temperature (operation) | -25 °C ... 85 °C (Plug / socket) |
|---|---|
| -40 °C ... 85 °C (without mechanical actuation) | |
| Degree of protection | IP67 |
General
| Note | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
|---|---|
| Rated current at 40°C | 4 A |
| Rated voltage | 60 V |
| Rated surge voltage | 1.5 kV |
| Number of positions | 5 |
| Insulation resistance | ≥ 100 MΩ |
| Coding | A - standard |
| Standards/regulations | M12 connector IEC 61076-2-101 |
| Status display | No |
| Overvoltage category | II |
| Degree of pollution | 3 |
| Connection method | Solder cup |
| Insertion/withdrawal cycles | > 100 |
| Torque | 1.25 Nm (Installation-side) |
| Mounting type | Rear mounting Pg9 With locking nut |
Material
| Flammability rating according to UL 94 | HB |
|---|---|
| Contact material | CuZn |
| Contact surface material | Au |
| Contact carrier material | PA 6.6 |
| Material, knurls | PA 6.6 |
| Sealing material | Viton |
Standards and Regulations
| Standard designation | M12 connector |
|---|---|
| Standards/regulations | IEC 61076-2-101 |
| Flammability rating according to UL 94 | HB |
Environmental Product Compliance
| REACh SVHC | Lead 7439-92-1 |
|---|---|
| China RoHS | Environmentally Friendly Use Period = 25; |
| For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |