View larger
SACC-DSI-M 8FS-3CON-L180 1694363 PHOENIX CONTACT Flush-type connector
SACC-DSI-M 8FS-3CON-L180
1694363
PHOENIX CONTACT
20 Pcs.
Connectors > Circular connector, mounting (PCB)
Field Device Connectors (FDC)
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
Phoenix Contact flush-type connector, part number SACC-DSI-M 8FS-3CON-L180, acts as a sturdy panel interface for miniature sensor and actuator lines. Compact bulkhead connectors are widely used in industrial machinery to establish sealed, vibration-resistant connection paths between exterior cabling and interior electronics.
Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Type of plug-in contact, outer side (EF005528): Female (bus)
- Mounting method (EF000003): Back wall mounting
- Screw-in thread (EF012303): M12
- With shield connection (EF002535): No
- Number of poles (EF001391): 3
- Number of control contacts (EF012217): 3
- With PE-connection (EF005600): No
- Housing material (EF001596): Brass
- Coating housing (EF001601): Nickel-plated
- Degree of protection (IP), mounted (EF007466): IP67
- Ambient temperature (EF002386): 85 °C
- Operating temperature (EF002393): -40 °C
- Rated current In (EF008250): 4 A
- With thread (EF003723): Yes
More info
▲Key Commercial Data
| Orderkey | 1694363 |
|---|---|
| Packing unit | 20 pc |
| Minimum order quantity | 20 pc |
| Catalog page | Page 226 (C-2-2013) |
| GTIN | 4017918178666 |
| Weight per Piece (excluding packing) | 13.650 g |
| Custom tariff number | 85366990 |
| Country of origin | DE (Germany) |
General
| Rated current at 40°C | 4 A |
|---|---|
| Rated voltage | 50 V AC |
| 60 V DC | |
| Rated surge voltage | 1.5 kV |
| Number of positions | 3 |
| Insulation resistance | ≥ 100 MΩ |
| Coding | A - standard |
| Standards/regulations | M8 connector IEC 61076-2-104 |
| Status display | No |
| Overvoltage category | II |
| Degree of pollution | 3 |
| Connection method | Solder pins |
| Torque | 1 Nm ... 1.5 Nm (Installation-side) |
| Mounting type | Rear mounting M12 x 1 With flat nut |
Material
| Flammability rating according to UL 94 | HB |
|---|---|
| Contact material | CuSn |
| Contact surface material | Au |
| Contact carrier material | PA 6.6 |
| Material, knurls | Nickel-plated brass |
| Sealing material | NBR |
| Additional material specifications | EP (Grout material) |
Standards and Regulations
| Standard designation | M8 connector |
|---|---|
| Standards/regulations | IEC 61076-2-104 |
| Connection in acc. with standard | CUL |
| Flammability rating according to UL 94 | HB |
Environmental Product Compliance
| REACh SVHC | Lead 7439-92-1 |
|---|---|
| China RoHS | Environmentally Friendly Use Period = 25; |
| For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |