PHOENIX CONTACT SACC-CI-M12MS-8CON-L90 SH SCO SACC-CI-M12MS-8CON-L90 SH SCO 1437038 PHOENIX CONTACT Flush-type connector View larger
Images are for illustrative purposes only. Please refer to data sheet for details

SACC-CI-M12MS-8CON-L90 SH SCO 1437038 PHOENIX CONTACT Flush-type connector

SACC-CI-M12MS-8CON-L90 SH SCO

1437038

PHOENIX CONTACT

20 Pcs.

Flush-type connector Contact holder, 8-pole, Male, angled, M12, coding: A, Printed circuit board mounting, Wave soldering, Alternative product according to RoHS II without exception 6c (Pb< 0.1%) Item code: 1239644 Contact carrier, 8-position, Pin, angled, M12, coding: A, PCB mounting, Wave soldering, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239644

Connectors > Contact insert for circular connectors
Field Device Connectors (FDC)

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.

Request Quote

Product Overview

The Phoenix Contact SACC-CI-M12MS-8CON-L90 SH SCO functions as a flush-type connector designed to establish protected device-level connections for industrial control systems. Panel-mounted receptacles of this variety allow sensors, actuators, and communication lines to interface cleanly with internal device circuitry.

Pricing, availability and lead time are confirmed per enquiry through an RFQ.

  • Product type: Contact insert
  • Application: Signal
  • Number of positions: 8
  • Seal present: yes
  • Shielded: yes
  • Coding: A
  • Thread type: M12
  • Data management status Article revision: 05
  • Insulation characteristics Overvoltage category: III
  • Degree of pollution: 3
  • Rated surge voltage: 0.8 kV
  • Contact resistance: ≤ 3 mΩ
  • Insulation resistance: ≥ 100 MΩ
  • Nominal voltage U N: 30 V
  • Nominal current I N: 2 A
  • Connection method: Wave soldering

More info

▲
Technical data

Notes
Notes on operationThe electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration.

Product properties
Product typeContact insert
ApplicationSignal
Number of positions8
Seal presentyes
Shieldedyes
CodingA
Thread typeM12
Data management status
Article revision05
Insulation characteristics
Overvoltage categoryIII
Degree of pollution3

Electrical properties
Rated surge voltage0.8 kV
Contact resistance≤ 3 mΩ
Insulation resistance≥ 100 MΩ
Nominal voltage UN30 V
Nominal current IN2 A

Connection data
Connection methodWave soldering

Material specifications
Flammability rating according to UL 94V0
Seal materialFKM / EPDM
Contact materialCuZn
Contact surface materialAu
Contact carrier materialPA 6.6

Connector
Connection 1
Head designPin
Head cable outletangled
Head thread typeM12
CodingA

Mechanical properties
Mechanical data
Insertion/withdrawal cycles> 100

Environmental and real-life conditions
Ambient conditions
Degree of protectionIP67
IP67
Ambient temperature (operation)-25 °C ... 85 °C (Plug / socket)
-40 °C ... 85 °C (without mechanical actuation)

Standards and regulations
M12
Standard designationM12 connector
Standards/specificationsIEC 61076-2-101

Mounting
Mounting typePCB mounting

Packaging specifications
Type of packagingBlister

Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.