View larger
Images are for illustrative purposes only. Please refer to data sheet for details
K-5E-M17 M9/010-C01/M17 F8 1619322 PHOENIX CONTACT Connector in molded plastic on both sides
K-5E-M17 M9/010-C01/M17 F8
1619322
PHOENIX CONTACT
2 Pcs.
Connector in molded plastic on both sides
Plug-in connector coated with plastic on both sides, series: KST, M17-Female, straight coated by plastic extrusion, number of poles: 5+PE, Locking type: Screw lock, to M17-Male, straight coated by plastic extrusion, number of poles: 5+PE, cable length: 10 m, shielded: yes, Alternative product according to RoHS II without exception 6c (Pb< 0.1%) item code: 1243443
Connector in molded plastic on both sides, series: KST, M17-Socket, Straight, plastic molded, number of positions: 5+PE, type of locking: Screw locking mechanism, on M17-Pin, Straight, plastic molded, number of positions: 5+PE, cable length: 10 m, shielded: yes, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1243443
Cables > Power cable less 1 kV, for moving application
Field Device Connectors (FDC)
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
A Phoenix Contact connector in molded plastic on both sides, identified as K-5E-M17 M9/010-C01/M17 F8, facilitates robust signal and power distribution across factory floors. This assembly features an M17 zinc die-cast housing with screw locking, supporting a maximum current of 14 A at 630 V with IP67 protection when locked.
Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Notes on operation: Observe derating curve.
- Product type: Signal and power cable
- Data management status Article revision: 12
- Connector specifications Type: Straight, plastic molded
- Housing material: Zinc die-cast
- Thread type: M17
- Type of locking: Screw locking mechanism
- Degree of protection: IP67, when in locked state
- No. of pos.: 5+PE
- Direction of rotation: Standard
- Contact switching type: Socket
- Insertion/withdrawal cycles: 50
- Contact resistance: < 0.3 mΩ
- Max. current: 14 A
- Voltage: 630 V
- Overvoltage category: III
More info
▲Technical data
Notes
| Notes on operation | Observe derating curve. |
| Safety note | |
| Safety note | WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property. |
| • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible. | |
| • WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product. | |
| • The products are suitable for applications in plant, controller, and electrical device engineering. | |
| • When operating the connectors in outdoor applications, they must be separately protected against environmental influences. | |
| • Assembled products may not be manipulated or improperly opened. | |
| • Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products). | |
| • When using the product in direct connection with third-party manufacturers, the user is responsible. | |
| • For operating voltages > 50 V AC, conductive connector housings must be grounded | |
| • Ensure that the protective or functional ground has been properly connected. | |
| • VDE 0100/1.97 § 411.1.3.2 and DIN EN 60 204/11.98 § 14.1.3 are applicable when combining several circuits in a cable and/or connector | |
| • Only use tools recommended by Phoenix Contact | |
| • The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product. | |
| • Operate the connector only when it is fully plugged in and interlocked. | |
| • Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards. | |
| • Observe the minimum bending radius of the cable. Lay the cable without twisting it. | |
| • The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12). | |
Product properties
| Product type | Signal and power cable |
| Data management status | |
| Article revision | 12 |
Connector
| Connector specifications | |
| Type | Straight, plastic molded |
| Housing material | Zinc die-cast |
| Thread type | M17 |
| Type of locking | Screw locking mechanism |
| Degree of protection | IP67, when in locked state |
| No. of pos. | 5+PE |
| Direction of rotation | Standard |
| Contact switching type | Socket |
| Insertion/withdrawal cycles | 50 |
| Contact resistance | < 0.3 mΩ |
| Max. current | 14 A |
| Voltage | 630 V |
| Overvoltage category | III |
| Degree of pollution | 3 |
| Rated surge voltage | 6 kV |
| Ambient temperature (operation) | -40 °C ... 105 °C |
| Cable specifications | |
| Cable type | PSLC11Y-J |
| Shielded | yes |
| Cable structure | 4x 1.0 mm² + 2x 0.5 mm² |
| External cable diameter | 8.90 mm ±0.3 mm |
| Outer sheath, material | PUR |
| Material wire insulation | PP |
| Single wire, color | black 1, black 2, black 3, black 4, green/yellow Power wires + PE |
| black, white Signal wires | |
| Nominal voltage, cable | 1000 V |
| Test voltage | 4 kV |
| Smallest bending radius, movable installation | 69 mm |
| Max. bending cycles | 5000000 |
| Traversing path | 5 m |
| Acceleration | 5 m/s² |
| Ambient temperature (operation) for fixed installation | -40 °C ... 80 °C |
| Ambient temperature (operation) for flexible installation | -25 °C ... 80 °C |
| UL AWM style | 80°C/1000 V |
| Special properties | Flexible cable conduit capable |
| Flame resistance | according to UL 758/1581 FT1 |
| Halogen-free | in accordance with EN 50267-2-1 |
| Resistance to oil | EN 60811-2-1 |
| Connector specifications (second page) | |
| Type | Straight, plastic molded |
| Housing material | Zinc die-cast |
| Thread type | M17 |
| Degree of protection | IP67, when in locked state |
| No. of pos. | 5+PE |
| Direction of rotation | Standard |
| Contact switching type | Pin |
| Insertion/withdrawal cycles | 50 |
| Contact resistance | < 0.3 mΩ |
| Max. current | 14 A |
| Voltage | 630 V |
| Overvoltage category | III |
| Degree of pollution | 3 |
| Rated surge voltage | 6 kV |
| Ambient temperature (operation) | -40 °C ... 105 °C |
Cable/line
| Cable length | 10 m |