PHOENIX CONTACT SAC-12P-1,5-PUR/FR SCO SAC-12P- 1,5-PUR/FR SCO 1430653 PHOENIX CONTACT Sensor/actuator cable View larger
Images are for illustrative purposes only. Please refer to data sheet for details

SAC-12P- 1,5-PUR/FR SCO 1430653 PHOENIX CONTACT Sensor/actuator cable

SAC-12P-1,5-PUR/FR SCO

1430653

PHOENIX CONTACT

1 Pcs.

Sensor/actuator cable Sensor/actuator cable, 12-pole halogen-free, free cable end, to Elbow Female M12, coding: A SPEEDCON, cable length: 1.5 m Sensor/actuator cable, 12-position, PUR halogen-free, black RAL 9005, free cable end, on Socket angled M12 SPEEDCON, coding: A, cable length: 1.5 m

Automation > Sensor-actuator patch cord
Industrial Field Connectivity (IFC)

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.

Request Quote

Product Overview

This is a Phoenix Contact SAC-12P-1,5-PUR/FR SCO sensor/actuator cable engineered for linking multi-pin field devices in modern automation setups. High-density connector cables provide dependable signal transmission for sophisticated sensors and actuators. Pricing, availability and lead time are confirmed per enquiry through an RFQ.

  • Product type: Sensor/actuator cable
  • Application: Standard
  • Number of positions: 12
  • No. of cable outlets: 1
  • Shielded: no
  • Coding: A
  • Data management status Article revision: 08
  • Insulation characteristics Overvoltage category: II
  • Degree of pollution: 3
  • Flammability rating according to UL 94: V0
  • Seal material: NBR
  • Material of grip body: TPU, hardly inflammable, self-extinguishing
  • Contact material: CuZn
  • Contact surface material: Ni/Au
  • Contact carrier material: PA 6.6
  • Material for screw connection: Zinc die-cast, nickel-plated

More info

▲
Technical data

Product properties
Product typeSensor/actuator cable
ApplicationStandard
Number of positions12
No. of cable outlets1
Shieldedno
CodingA
Data management status
Article revision08
Insulation characteristics
Overvoltage categoryII
Degree of pollution3

Material specifications
Flammability rating according to UL 94V0
Seal materialNBR
Material of grip bodyTPU, hardly inflammable, self-extinguishing
Contact materialCuZn
Contact surface materialNi/Au
Contact carrier materialPA 6.6
Material for screw connectionZinc die-cast, nickel-plated

Electrical properties
Insulation resistance≥ 100 MΩ
Nominal voltage UN30 V AC
30 V DC
Nominal current IN1.5 A

Signaling
Status displayno
Status display presentNo

Connection data
Conductor connection
Tightening torque0.4 Nm (M12 connector)

Connector
Connection 1
Typefree cable end
Connection 2
TypeSocket angled M12 SPEEDCON
Number of positions12
Locking typeSPEEDCON
Coding typeA

Cable/line
Cable length1.5 m
PUR halogen-free black [PUR]
Dimensional drawing
Cable weight17 kg/km
Number of positions12
Shieldedno
Cable typePUR halogen-free black [PUR]
Conductor structure signal line18x 0.10 mm
AWG signal line26
Conductor cross section12x 0.14 mm² (Signal line)
Wire diameter incl. insulation1 mm ±0.05 mm (Signal line)
External cable diameter7.20 mm
Outer sheath, materialPUR
External sheath, colorblack RAL 9005
Conductor materialTin-plated Cu litz wires
Material wire insulationPP
Single wire, colorwhite, brown, green, yellow, gray, pink, blue, red, black, violet, gray/pink, red/blue
Overall twist12 wires twisted in layers
Max. conductor resistance142 Ω/km
Nominal voltage, cable≤ 300 V
Test voltage≥ 1500 V
Minimum bending radius, fixed installation5 x D
Minimum bending radius, flexible installation10 x D
Smallest bending radius, fixed installation36 mm
Smallest bending radius, movable installation72 mm
Dynamic load capacity (bending)Max. bending cycles: 4000000, Bending radius: 54 mm, Traversing path: 10 m, Traversing rate: 3 m/s, Acceleration: 10 m/s²
Halogen-freein accordance with DIN EN 50267-2-1
Flame resistancein acc. to UL VW1
DIN EN 60332-1-2
Resistance to oilEN 60811-2-1
Other resistanceEN 50525-2-21:2012-01
partly UV-resistant (in accordance with DIN EN ISO 4892-2-A)
Special propertiesLow adhesion surface
Ambient temperature (operation)-40 °C ... 80 °C (cable, fixed installation)
-5 °C ... 80 °C (Cable, flexible installation)

Environmental and real-life conditions
Ambient conditions
Degree of protectionIP65
IP67
IP68
Ambient temperature (operation)-25 °C ... 85 °C (Plug / socket)
-40 °C ... 80 °C (cable, fixed installation)
-20 °C ... 80 °C (Cable, flexible installation)

Standards and regulations
Standard designationM12 connector
Standards/specificationsIEC 61076-2-101

Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.