View larger
CABLE-FLK40/4FLK14/HF/S7/2,0M 1464628 PHOENIX CONTACT Round cable made without halogens. Connection 1: Femal..
CABLE-FLK40/4FLK14/HF/S7/2,0M
1464628
PHOENIX CONTACT
1 Pcs.
Cables > PLC connection cable
INTERFACE Components (IF)
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
The CABLE-FLK40/4FLK14/HF/S7/2,0M 1464628 PHOENIX CONTACT Round cable made without halogens is a system cable designed to link industrial controllers with input and output cards seamlessly. These pre-assembled wiring components facilitate reliable signal transmission in complex automation cabinets, bridging the gap between controllers and field devices for both digital and analog signals. Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Product type: System cable
- Ambient conditions Degree of protection: IP00
- Degree of protection (Installation location): ≥ IP54 (Installation location)
- Ambient temperature (operation): -40 °C ... 50 °C (fixed installation)
- Ambient temperature (storage/transport): -40 °C ... 80 °C
- Altitude: ≤ 2000 m
- Operating voltage (AC): ≤ 30 V AC
- Operating voltage (DC): ≤ 60 V DC
- Nominal operating mode: 100% operating factor
- Current (Per path, 50°C): ≤ 1 A (Uncoiled, see derating)
- Current (Per path, 70°C): ≤ 0.6 A (Uncoiled, see derating)
- Supported controller: SIEMENS S7-1500 Suitable I/O card: 6ES7521-1BP00-0AA0 (Sinking mode)
- Cable length: 2 m
- Number of positions: 14
- Shielded: no
- Conductor type: Assembled, halogen-free round cable
More info
▲| Product type | System cable |
| Ambient conditions | |
| Degree of protection | IP00 |
| Degree of protection (Installation location) | ≥ IP54 (Installation location) |
| Ambient temperature (operation) | -40 °C ... 50 °C (fixed installation) |
| -10 °C ... 50 °C (flexible installation) | |
| Ambient temperature (storage/transport) | -40 °C ... 80 °C |
| Altitude | ≤ 2000 m |
| Operating voltage (AC) | ≤ 30 V AC |
| Operating voltage (DC) | ≤ 60 V DC |
| Nominal operating mode | 100% operating factor |
| Current (Per path, 50°C) | ≤ 1 A (Uncoiled, see derating) |
| Current (Per path, 70°C) | ≤ 0.6 A (Uncoiled, see derating) |
| Supported controller SIEMENS S7-1500 | |
| Suitable I/O card | 6ES7521-1BP00-0AA0 (Sinking mode) |
| 6ES7522-1BP00-0AA0 | |
| 6ES7522-1BP50-0AA0 | |
| 6ES7523-1BP50-0AA0 (DI32 (Sinking mode)/DQ32) | |
| Cable length | 2 m |
| Number of positions | 14 |
| Shielded | no |
| Conductor type | Assembled, halogen-free round cable |
| Conductor structure signal line | 7x 0.16 mm |
| AWG signal line | 26 |
| Conductor cross section | 14x 0.14 mm² |
| Wire diameter incl. insulation | 1 mm ±0.03 mm |
| External cable diameter | 5.8 mm ±0.4 mm |
| Outer sheath, material | halogen-free (type 2) |
| External sheath, color | gray |
| Conductor material | Tin-plated Cu litz wires |
| Cable resistance | ≤ 145 Ω/km (20 °C) |
| Insulation resistance | ≥ 20 MΩ*km (20 °C) |
| Smallest bending radius, fixed installation | 50 mm |
| Smallest bending radius, movable installation | 93 mm |
| Max. bending cycles | 5000 (at a radius of ≥ 15x outside diameter) |
| Halogen-free | yes |
| Flame resistance | IEC 60332-1-2 (raw cable) |
| VDE 0842, Part 332-1-2 (raw cable) | |
| IEC 60332-3-22 (raw cable) | |
| Resistance to oil | can withstand occasional splashes (raw cable) |
| color code | |
| IDC/FLK40 (1) | IDC/FLK14-1 (1) = black |
| IDC/FLK40 (3) | IDC/FLK14-1 (2) = brown |
| IDC/FLK40 (5) | IDC/FLK14-1 (3) = red |
| IDC/FLK40 (7) | IDC/FLK14-1 (4) = orange |
| IDC/FLK40 (9) | IDC/FLK14-1 (5) = yellow |
| IDC/FLK40 (11) | IDC/FLK14-1 (6) = green |
| IDC/FLK40 (13) | IDC/FLK14-1 (7) = blue |
| IDC/FLK40 (15) | IDC/FLK14-1 (8) = violet |
| IDC/FLK40 (19) | IDC/FLK14-1 (9) = gray |
| IDC/FLK40 (17) | IDC/FLK14-1 (10) = white |
| IDC/FLK40 (21) | IDC/FLK14-2 (1) = black |
| IDC/FLK40 (23) | IDC/FLK14-2 (2) = brown |
| IDC/FLK40 (25) | IDC/FLK14-2 (3) = red |
| IDC/FLK40 (27) | IDC/FLK14-2 (4) = orange |
| IDC/FLK40 (29) | IDC/FLK14-2 (5) = yellow |
| IDC/FLK40 (31) | IDC/FLK14-2 (6) = green |
| IDC/FLK40 (33) | IDC/FLK14-2 (7) = blue |
| IDC/FLK40 (35) | IDC/FLK14-2 (8) = violet |
| IDC/FLK40 (39) | IDC/FLK14-2 (9) = gray |
| IDC/FLK40 (37) | IDC/FLK14-2 (10) = white |
| IDC/FLK40 (2) | IDC/FLK14-3 (1) = black |
| IDC/FLK40 (4) | IDC/FLK14-3 (2) = brown |
| IDC/FLK40 (6) | IDC/FLK14-3 (3) = red |
| IDC/FLK40 (8) | IDC/FLK14-3 (4) = orange |
| IDC/FLK40 (10) | IDC/FLK14-3 (5) = yellow |
| IDC/FLK40 (12) | IDC/FLK14-3 (6) = green |
| IDC/FLK40 (14) | IDC/FLK14-3 (7) = blue |
| IDC/FLK40 (16) | IDC/FLK14-3 (8) = violet |
| IDC/FLK40 (20) | IDC/FLK14-3 (9) = gray |
| IDC/FLK40 (18) | IDC/FLK14-3 (10) = white |
| IDC/FLK40 (22) | IDC/FLK14-4 (1) = black |
| IDC/FLK40 (24) | IDC/FLK14-4 (2) = brown |
| IDC/FLK40 (26) | IDC/FLK14-4 (3) = red |
| IDC/FLK40 (28) | IDC/FLK14-4 (4) = orange |
| IDC/FLK40 (30) | IDC/FLK14-4 (5) = yellow |
| IDC/FLK40 (32) | IDC/FLK14-4 (6) = green |
| IDC/FLK40 (34) | IDC/FLK14-4 (7) = blue |
| IDC/FLK40 (36) | IDC/FLK14-4 (8) = violet |
| IDC/FLK40 (40) | IDC/FLK14-4 (9) = gray |
| IDC/FLK40 (38) | IDC/FLK14-4 (10) = white |
| Cross section AWG | (converted acc. to IEC) |
| Connection 1 | |
| Connection in acc. with standard | based on IEC 60603-13 |
| Connection method | IDC/FLK socket strip |
| Number of connections | 1 |
| Number of positions | 40 |
| Insertion/withdrawal cycles | > 50 |
| Pitch | 2.54 mm |
| Connection 2 | |
| Connection in acc. with standard | based on IEC 60603-13 |
| Connection method | IDC/FLK socket strip |
| Number of connections | 4 |
| Number of positions | 14 |
| Insertion/withdrawal cycles | > 50 |
| Pitch | 2.54 mm |
| General | For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met. |