View larger
MC-3/7-MULTI-67-PV-LG 1415234 PHOENIX CONTACT Cable feed-through plates
MC-3/7-MULTI-67-PV-LG
1415234
PHOENIX CONTACT
1 Pcs.
Cables > Mounting plate for cable support system
Industrial plug-in connectors/interfaces
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
A Phoenix Contact cable feed-through plate (MC-3/7-MULTI-67-PV-LG 1415234) is deployed in industrial control panels to manage multiple incoming cables safely through a single cutout. These sealing plates help maintain cabinet ingress protection ratings while providing effective mechanical stabilization. Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- General: incl. mounting screws
- General: 2 mm thick coated, galvanized sheet steel
- Product type: Cable feed-through
- No. of conductors: 7
- Data management status Article revision: 00
- External cable diameter: 1x 30 mm ... 60 mm
- Tightening torque: 1.5 Nm ... 2 Nm (Mounting screws)
- Width: 92 mm
- Height: 43 mm
- Length: 222 mm
- Drill hole distance, horizontal: 62 mm
- Drill hole distance, vertical: 194 mm
- Hole diameter: 8.5 mm
- Color: light gray (RAL 7035)
- Material interior: galvanized sheet steel (Core)
- Material exterior: TPE-SEBS (external material)
More info
▲| General | incl. mounting screws |
| General | 2 mm thick coated, galvanized sheet steel |
| Product type | Cable feed-through |
| No. of conductors | 7 |
| Data management status | |
| Article revision | 00 |
| External cable diameter | 1x 30 mm ... 60 mm |
| Tightening torque | 1.5 Nm ... 2 Nm (Mounting screws) |
| Dimensional drawing | |
| Width | 92 mm |
| Height | 43 mm |
| Length | 222 mm |
| Drill hole distance, horizontal | 62 mm |
| Drill hole distance, vertical | 194 mm |
| Hole diameter | 8.5 mm |
| Color | light gray (RAL 7035) |
| Material interior | galvanized sheet steel (Core) |
| Material exterior | TPE-SEBS (external material) |
| Flammability rating according to UL 94 | V0 |
| External cable diameter 30-60 mm | 1x 30 mm ... 60 mm |
| External cable diameter 10-14 mm | 4x 10 mm ... 14 mm |
| External cable diameter 24-54 mm | 2x 24 mm ... 54 mm |
| Ambient conditions | |
| Degree of protection | IP66 (Minimum sheet thickness >= 2.5 mm) |
| IP67 (Minimum sheet thickness >= 2.5 mm) | |
| Ambient temperature (operation) | -40 °C ... 100 °C |
| Assembly note | M8 mounting screw, torque: 1.5 - 2.0 Nm, SW5 Allen key |
| The mounting screws included should be used for assembly. Assembly steps: 1) Fix Multigates with the mounting screws provided (observe torque) 2) Make a hole in the membrane (with a screwdriver) or cut off the tip of the cone 3) Guide the cable through the opening (from the outside). Withdraw the cable approximately 20 mm (to improve strain relief). |