View larger
MC-35/37-MULTI-67-PV-LG 1415240 PHOENIX CONTACT Cable feed-through plates
MC-35/37-MULTI-67-PV-LG
1415240
PHOENIX CONTACT
1 Pcs.
Cables > Mounting plate for cable support system
Industrial plug-in connectors/interfaces
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
A Phoenix Contact cable feed-through plate (MC-35/37-MULTI-67-PV-LG 1415240) is an essential panel component designed to route bundled conductors safely into distribution boxes and industrial housings. This hardware prevents cable chafing and maintains cabinet integrity against external elements. Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Plate height (EF005176): 222 mm
- Plate width (EF005175): 92 mm
- Stainless steel, pickled (EF006388): Yes
More info
▲Key Commercial Data
| Orderkey | 1415240 |
|---|---|
| Packing unit | 1 pc |
| Catalog page | Page 690 (C-2-2017) |
| GTIN | 4055626039442 |
| Weight per Piece (excluding packing) | 291.100 g |
| Custom tariff number | 39269097 |
| Country of origin | FI (Finland) |
Dimensions
| Length | 222 mm |
|---|---|
| Width | 92 mm |
| Height | 29.5 mm |
| Drill hole distance, horizontal | 62 mm |
| Drill hole distance, vertical | 194 mm |
| External cable diameter | 4x 6 mm ... 10 mm |
| 14x 8 mm ... 12 mm | |
| 16x 10 mm ... 14 mm | |
| 2x 12 mm ... 18 mm | |
| 1x 17 mm ... 32 mm |
Ambient conditions
| Degree of protection | IP66 (Minimum sheet thickness >= 2.5 mm) |
|---|---|
| IP67 (Minimum sheet thickness >= 2.5 mm) | |
| Ambient temperature (operation) | -40 °C ... 100 °C |
General
| No. of conductors | 37 |
|---|---|
| Material | TPE-SEBS |
| galvanized sheet steel () | |
| Flammability rating according to UL 94 | V0 |
| Color | light gray |
| Torque | 1.5 Nm ... 2 Nm (Mounting screws) |
| Note | incl. mounting screws |
| Installation instructions | M8 mounting screw, torque: 1.5 - 2.0 Nm, SW5 Allen key |
| The mounting screws included should be used for assembly. Assembly steps: 1) Fix Multigates with the mounting screws provided (observe torque) 2) Make a hole in the membrane (with a screwdriver) or cut off the tip of the cone 3) Guide the cable through the opening (from the outside). Withdraw the cable approximately 20 mm (to improve strain relief). |
Environmental Product Compliance
| China RoHS | Environmentally friendly use period: unlimited = EFUP-e |
|---|---|
| No hazardous substances above threshold values |