View larger
SACB-8/8-L-PUR SCO FLK14/MCV3P 1547928 PHOENIX CONTACT Sensor/actuator box
SACB-8/8-L-PUR SCO FLK14/MCV3P
1547928
PHOENIX CONTACT
1 Pcs.
Cables > Passive sensor-actuator interface (with cable)
QUICKON Installation System (QPD)
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
Acting as a structured distributor box, the Phoenix Contact SACB-8/8-L-PUR SCO FLK14/MCV3P efficiently consolidates sensor and actuator connections in complex automation setups. Modular signal boxes minimize cabinet clutter by routing numerous field devices through a single integrated interface.
Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Product type: Distributor box
- Application: Standard
- Number of positions: 4
- Number of slots: 8
- Coding: A
- LED: yes
- Local diagnostics Monitored function: Supply voltage
- Optical representation: Green LED
- Max. operating voltage U max: 30 V DC
- Local diagnostics: Supply voltage Green LED
- Nominal voltage U N: 24 V DC
- Rated current, total: 4 A
- Max. current carrying capacity per path: 0.5 A (1 A to 40 °C)
- Current carrying capacity per slot: 0.5 A (1 A to 40 °C)
- Conductor connection Sensor/actuator connection system: M12-SPEEDCON-socket
- Conductor connection Flexible power supply: 0.14 mm² ... 1.5 mm²
More info
▲| Assembly note | NOTE:Observe the permissible bending radii when routing cables, since the degree of protection may be at risk if the bending forces are too high. Reduce mechanical loads upstream of the connector, e.g., by using cable ties. |
| Note on application | Unused slots are to be sealed off prior to commissioning. Suitable sealing elements are to be found under "Accessories". |
| Product type | Distributor box |
| Application | Standard |
| Number of positions | 4 |
| Number of slots | 8 |
| Coding | A |
| LED | yes |
| Local diagnostics | |
| Monitored function | Supply voltage |
| Optical representation | Green LED |
| Max. operating voltage Umax | 30 V DC |
| Local diagnostics | Supply voltage Green LED |
| Status display I/O Yellow LED | |
| Nominal voltage UN | 24 V DC |
| Rated current, total | 4 A |
| 8 A (up to 40 °C) | |
| Max. current carrying capacity per path | 0.5 A (1 A to 40 °C) |
| Current carrying capacity per slot | 0.5 A (1 A to 40 °C) |
| Conductor connection | |
| Sensor/actuator connection system | M12-SPEEDCON-socket |
| Conductor cross section Flexible power supply | 0.14 mm² ... 1.5 mm² |
| Connection cross section AWG Flexible power supply | 26 ... 16 |
| Stripping length Signal line | 9 mm |
| Tightening torque slot sensor/actuator cable | 0.4 Nm |
| Tightening torque of mounting screw for fixing the housing | 0.5 Nm |
| Pin assignment | |
| Slot/position = Wire color or connection | 1 / 4 (A) = 1 |
| 2 / 4 (A) = 2 | |
| 3 / 4 (A) = 3 | |
| 4 / 4 (A) = 4 | |
| 5 / 4 (A) = 5 | |
| 6 / 4 (A) = 6 | |
| 7 / 4 (A) = 7 | |
| 8 / 4 (A) = 8 | |
| 1-8 / 1 (+ 24 V) = 9 | |
| 1-8 / 1 (+ 24 V) = 11 | |
| 1-8 / 1 (+ 24 V) = 13 | |
| 1-8 / 3 (0 V) = 10 | |
| 1-8 / 3 (0 V) = 12 | |
| 1-8 / 3 (0 V) = 14 | |
| Status display present | Yes |
| Dimensional drawing | |
| Width | 58 mm |
| Height | 28 mm |
| Length | 159 mm |
| Material Threaded sleeve | Die-cast zinc |
| Material Housing | PBT |
| Material Molding compound | PUR |
| Seal material O-ring | NBR |
| Contact material | Cu alloy |
| Contact surface material | gold-plated |
| Contact carrier material | PA |
| Material of contact, master cable side | CU alloy |
| Material of the contact carrier on the master cable side | PA |
| Material of contact surface, master cable side | tin-plated |
| Connection method | Rear FLK pin strip and MINI COMBICON |
| Ambient conditions | |
| Degree of protection | IP54 (with sealed mounting holes) |
| Ambient temperature (operation) | -30 °C ... 80 °C |
| Ambient temperature (storage/transport) | -30 °C ... 90 °C |
| M12 | |
| Standard designation | M12 connector |
| Standards/specifications | IEC 61076-2-101 |