PHOENIX CONTACT AXL F DOR4/2 AC/220DC 1F AXL F DOR4/2 AC/220DC 1F 2700608 PHOENIX CONTACT I/O module View larger
Images are for illustrative purposes only. Please refer to data sheet for details

AXL F DOR4/2 AC/220DC 1F 2700608 PHOENIX CONTACT I/O module

AXL F DOR4/2 AC/220DC 1F

2700608

PHOENIX CONTACT

1 Pcs.

I/O module AxiolineF, Relay module, Relay outputs:4 (potential-free), Open contact, 220 VDC, 230 VAC, local bus transmission rate:100 MBit/s, protection index: IP20, including bus socket module and AxiolineF connectors Axioline F, Relay module, Relay outputs: 4 (floating), N/O contact, 220 V DC, 230 V AC, transmission speed in the local bus: 100 Mbps, degree of protection: IP20, including bus base module and Axioline F connectors

Automation > Fieldbus, decentr. periphery - digital I/O module
I/O

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.

Request Quote

Product Overview

The Phoenix Contact AXL F DOR4/2 AC/220DC 1F I/O module provides relay-based switching capabilities for Axioline automation stations, allowing control systems to interface with higher-voltage or alternating current loads. Such relay modules offer electrical isolation between control logic and field actuators.

Pricing, availability and lead time are confirmed per enquiry through an RFQ.

  • Width: 53.6 mm
  • Height: 126.1 mm
  • Depth: 54 mm
  • Note on dimensions: The depth applies when a TH 35-7.5 DIN rail is used (in accordance with EN 60715).
  • Note on application Note on application: Only for industrial use
  • Axioline F local bus Number of interfaces: 2
  • Connection method: Bus base module
  • Transmission speed: 100 Mbps
  • Module Input address area: 0 Byte
  • Output address area: 1 Byte
  • Required parameter data: 1 Byte
  • Required configuration data: 6 Byte
  • Relay Number of outputs: 4 (floating)
  • Connection method: Push-in connection
  • Connection technology: 2-conductor
  • Contact switching type: N/O contact

More info

▲
Technical data

Dimensions
Dimensional drawing
Width53.6 mm
Height126.1 mm
Depth54 mm
Note on dimensionsThe depth applies when a TH 35-7.5 DIN rail is used (in accordance with EN 60715).

Notes
Note on application
Note on applicationOnly for industrial use

Interfaces
Axioline F local bus
Number of interfaces2
Connection methodBus base module
Transmission speed100 Mbps

System properties
Module
Input address area0 Byte
Output address area1 Byte
Required parameter data1 Byte
Required configuration data6 Byte

Output data
Relay
Number of outputs4 (floating)
Connection methodPush-in connection
Connection technology2-conductor
Contact switching typeN/O contact
Switching currentmax. 8 A AC (cos phi = 1)
For DC see load limit curve, e.g., the following values:
max. 8 A DC (≤ 30 V, ohmic load)
max. 500 mA DC (110 V, ohmic load)
max. 250 mA DC (220 V DC, ohmic load)
max. 220 mA DC (125 V DC, L/R ≤ 50 ms, applications with UL approval)
max. 110 mA DC (250 V DC, L/R ≤ 50 ms, applications with UL approval)
Switching capacitymax. 2000 VA
For DC see load limit curve, e.g., the following values:
max. 240 W (30 V DC)
max. 55 W (≥ 60 V DC)
max. 25 W (125 V DC, 250 V DC, applications with UL approval)
Switching capacity in accordance with IEC 60947-5-16 A (120 V (AC15))
3 A (240 V (AC15))
0.22 A (125 V (DC13))
0.1 A (250 V (DC-13))
Switching frequencymax. 6 (per minute)
Mechanical service life10x 106cycles

Product properties
Product typeI/O component
Product familyAxioline F
Typeblock modular
Mounting positionany (observe temperature and current derating)
Scope of deliveryincluding bus base module and Axioline F connectors
Data management status
Article revision02
Insulation characteristics
Overvoltage categoryIII (EN 61010-2-201/UL 61010-2-201), up to 2000 m above sea level
II (EN 61010-2-201/UL 61010-2-201), up to 3000 m above sea level
Pollution degree2

Electrical properties
Maximum power dissipation for nominal condition1.4 W
Potentials: Axioline F local bus supply (UBus)
Supply voltage5 V DC (via bus base module)
Current drawmax. 280 mA (all relays pick up)
Electrical isolation/isolation of the voltage ranges
Test voltage: Relay contact / logic4 kV
5 kV
Test voltage: Relay contact / functional ground4 kV
5 kV
Test voltage: Relay contact/relay contact (open contact)1 kV, 50 Hz, 1 min.
Test voltage: Relay contact/relay contact (adjacent male connectors)2.5 kV

Connection data
Connection technology
Connection nameAxioline F connector
Note on the connection methodPlease observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual.
When selecting the cables, please note that in the case of a small conductor cross section and high current, the terminal point temperature may be up to 30 K above the ambient temperature.
Conductor connection
Connection methodPush-in connection
Conductor cross section rigid0.2 mm² ... 1.5 mm²
Conductor cross section flexible0.2 mm² ... 1.5 mm²
Conductor cross section AWG24 ... 16
Stripping length8 mm
Axioline F connector
Connection methodPush-in connection
Note on the connection methodPlease observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual.
When selecting the cables, please note that in the case of a small conductor cross section and high current, the terminal point temperature may be up to 30 K above the ambient temperature.
Conductor cross section, rigid0.2 mm² ... 1.5 mm²
Conductor cross section, flexible0.2 mm² ... 1.5 mm²
Conductor cross section AWG24 ... 16
Stripping length8 mm

Environmental and real-life conditions
Ambient conditions
Ambient temperature (operation)-25 °C ... 60 °C (max. 6 A/channel for wall mounting on horizontal DIN rail; max. 4 A/channel for any mounting position)
-25 °C ... 50 °C (max. 8 A/channel for wall mounting on horizontal DIN rail; max. 6 A/channel for any mounting position)
-25 °C ... 40 °C (max. 8 A/channel for any mounting position)
Degree of protectionIP20
Air pressure (operation)70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)70 kPa ... 106 kPa (up to 3000 m above sea level)
Ambient temperature (storage/transport)-40 °C ... 85 °C
Permissible humidity (operation)5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)5 % ... 95 % (non-condensing)

Standards and regulations
Standard designationAmbient conditions
Standards/specificationsIEC 61850-3

Mounting
Mounting typeDIN rail mounting
Mounting positionany (observe temperature and current derating)

Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.