PHOENIX CONTACT IB IL TEMP 2 UTH-PAC IB IL TEMP 2 UTH-PAC 2861386 PHOENIX CONTACT Inline terminal View larger
Images are for illustrative purposes only. Please refer to data sheet for details

IB IL TEMP 2 UTH-PAC 2861386 PHOENIX CONTACT Inline terminal

IB IL TEMP 2 UTH-PAC

2861386

PHOENIX CONTACT

1 Pcs.

Inline terminal Inline, Temperature recording module, Analogue UTH inputs: 2 (Thermocouples or linear voltage), connection technology: 2 conductors, transmission rate on local bus: 500 kBit/s, protection rating: IP20, including Inline connector and marking surface Inline, Temperature measurement terminal, Analog UTH inputs: 2 (Thermocouples or linear voltage), connection technology: 2-conductor, transmission speed in the local bus: 500 kbps, degree of protection: IP20, including Inline connector and labeling field

Automation > Fieldbus, decentr. periphery - analogue I/O module
I/O

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.

Request Quote

Product Overview

Phoenix Contact inline terminal IB IL TEMP 2 UTH-PAC operates as a modular input device designed to interface thermocouple sensors with industrial automation systems. This component acquires temperature measurements and transmits the converted data across local bus architectures for system monitoring.

Pricing, availability and lead time are confirmed per enquiry through an RFQ.

  • Width: 12.2 mm
  • Height: 136.8 mm
  • Depth: 71.5 mm
  • Note on dimensions: Housing dimensions
  • Note on application Note on application: Only for industrial use
  • Utilization restriction CCCex note: Use in potentially explosive areas is not permitted in China.
  • Inline local bus Number of interfaces: 2
  • Connection method: Inline data jumper
  • Transmission speed: 500 kbps
  • Module ID code (dec.): 127
  • ID code (hex): 7F
  • Length code (hex): 02
  • Length code (dec): 02
  • Process data channel: 32 bit
  • Input address area: 4 Byte
  • Output address area: 4 Byte

More info

▲
Technical data

Dimensions
Dimensional drawing
Width12.2 mm
Height136.8 mm
Depth71.5 mm
Note on dimensionsHousing dimensions

Notes
Note on application
Note on applicationOnly for industrial use
Utilization restriction
CCCex noteUse in potentially explosive areas is not permitted in China.

Interfaces
Inline local bus
Number of interfaces2
Connection methodInline data jumper
Transmission speed500 kbps

System properties
Module
ID code (dec.)127
ID code (hex)7F
Length code (hex)02
Length code (dec)02
Process data channel32 bit
Input address area4 Byte
Output address area4 Byte
Register length32 bit
Required parameter data6 Byte
Required configuration data4 Byte

Input data
Analog
Input nameAnalog UTH inputs
Description of the inputInputs for thermocouples or linear voltage
Number of inputs2 (Thermocouples or linear voltage)
Connection methodInline connector
Connection technology2-conductor
Note regarding the connection technologyShielded compensating line for TC with encapsulated sensors
A/D conversion timetyp. 120 µs (per channel)
Sensor types that can be used (TC)U, T, L, J, E, K, N, S, R, B, C, W, HK
Measuring principleSuccessive approximation
Measured value representation16 bits (15 bits + sign bit)
Process data updatemax. 30 ms (For both channels)
Protective circuitSurge protection (TC channels); up to ±40 V

Product properties
Product typeI/O component
Product familyInline
Typemodular
Scope of deliveryincluding Inline connector and labeling field
Operating modeProcess data operation with 2 words
Diagnostics messagesFailure of the internal I/O supply I/O error message sent to the bus coupler
Failure of or insufficient communications power ULI/O error message sent to the bus coupler
I/O error Error message in the process data
User error Error message in the process data
Data management status
Article revision11
Insulation characteristics
Overvoltage categoryII (IEC 60664-1, EN 60664-1)
Pollution degree2 (IEC 60664-1, EN 60664-1)

Electrical properties
Maximum power dissipation for nominal condition0.9 W
Potentials: Communications power (UL)
Supply voltage7.5 V DC (via voltage jumper)
Current drawmax. 60 mA
typ. 43 mA
Potentials: Supply of analog modules (UANA)
Supply voltage24 V DC (via voltage jumper)
Supply voltage range19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current drawmax. 18 mA
typ. 11 mA
Electrical isolation/isolation of the voltage ranges
Test voltage: 7.5 V supply (bus logics)/24 V analog supply (analog I/O)500 V AC, 50 Hz, 1 min.
Test voltage: 7.5 V supply (bus logic)/functional ground500 V AC, 50 Hz, 1 min.
Test voltage: 24 V analog supply (analog I/O)/functional ground500 V AC, 50 Hz, 1 min.

Connection data
Connection technology
Connection nameInline connector
Conductor connection
Connection methodSpring-cage connection
Conductor cross section rigid0.08 mm² ... 1.5 mm²
Conductor cross section flexible0.08 mm² ... 1.5 mm²
Conductor cross section AWG28 ... 16
Stripping length8 mm
Inline connector
Connection methodSpring-cage connection
Conductor cross section, rigid0.08 mm² ... 1.5 mm²
Conductor cross section, flexible0.08 mm² ... 1.5 mm²
Conductor cross section AWG28 ... 16
Stripping length8 mm

Environmental and real-life conditions
Ambient conditions
Ambient temperature (operation)-25 °C ... 55 °C
Degree of protectionIP20
Air pressure (operation)70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)70 kPa ... 106 kPa (up to 3000 m above sea level)
Ambient temperature (storage/transport)-25 °C ... 85 °C
Permissible humidity (operation)10 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)10 % ... 95 % (non-condensing)

Standards and regulations
Protection classIII (IEC 61140, EN 61140, VDE 0140-1)

Mounting
Mounting typeDIN rail mounting

Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.