PHOENIX CONTACT PLC-RPT-110UC/21-21AU/RW PLC-RPT-110UC/21-21AU/RW 2900351 PHOENIX CONTACT Relay Module View larger
Images are for illustrative purposes only. Please refer to data sheet for details

PLC-RPT-110UC/21-21AU/RW 2900351 PHOENIX CONTACT Relay Module

PLC-RPT-110UC/21-21AU/RW

2900351

PHOENIX CONTACT

1 Pcs.

Relay Module PLC-INTERFACE for railway applications, consisting of base terminal block with push-in connection and plug-in miniature relay with multilayer gold contact, range: 0.7 x UN to 1.25 x UN, TX temperature class: -40 °C to +70 °C, 2 switched contacts, input voltage 110 V DC PLC-INTERFACE, for railway applications consisting of PLC-BPT.../21 base terminal with push-in connection and miniature plug-in relay with multilayer gold contact, range: 0.7 x UN to 1.25 x UN, TX temperature class: -40 °C to +70 °C, 2 changeover contacts, tens. 110 V DC input

Automation > Switching relay
Industrial Relays

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.

Request Quote

Product Overview

Engineered for corrosive or demanding operating environments, the PLC-RPT-110UC/21-21AU/RW Phoenix Contact relay module ensures dependable electrical isolation. Specialized relay modules with gold-plated contacts are frequently integrated into harsh industrial applications to guarantee low contact resistance and reliable signal switching over extended lifespans. Pricing, availability and lead time are confirmed per enquiry through an RFQ.

  • Complete with socket (EF003359): Yes
  • With detachable clamps (EF003340): No
  • With LED indication (EF005950): Yes
  • Rated control supply voltage DC (EF003980): 77 V
  • Voltage type for actuating (EF008242): DC
  • Drive, polarization (EF003355): Polarized
  • Drive, switching attitude (EF003356): Mono stable
  • Number of contacts as normally closed contact (EF008255): 0
  • Number of contacts as normally open contact (EF008256): 0
  • Number of contacts as change-over contact (EF008257): 2
  • Type of switch contact (EF003358): Single contact
  • With forced-guided contacts (EF003357): No
  • Material of contact surface (EF004020): Gold
  • Nominal current (EF000001): 0.0045 A
  • Degree of protection (IP) (EF005474): IP20
  • Width (EF000008): 14 mm

More info

▲

Key Commercial Data

Orderkey2900351
Packing unit10 pc
NoteMade to Order (non-returnable)
Catalog pagePage 419 (C-5-2017)
GTIN4046356510097
Weight per Piece (excluding packing)64.170 g
Custom tariff number85364900
Country of originDE (Germany)

Note

Utilization restrictionEMC: class A product, see manufacturer's declaration in the download area

Dimensions

Width14 mm
Height80 mm
Depth94 mm

Ambient conditions

Ambient temperature (operation)-40 °C ... 70 °C (Temperature class TX)
Ambient temperature (storage/transport)-40 °C ... 85 °C

Coil side

Nominal input voltage UN110 V DC
Input voltage range in reference to UN0.7 ... 1.25
Typical input current at UN4.5 mA
Typical response time5 ms
Typical release time11 ms
Coil voltage60 V DC
Protective circuitBridge rectifier Bridge rectifier
Free-wheeling diode Damping diode
Surge protection
RCZ filter
Wide-range electronics
Operating voltage displayYellow LED
Power dissipation for nominal condition0.5 W

Contact side

Contact type2 PDT
Type of switch contactSingle contact
Contact materialAgNi, hard gold-plated
Maximum switching voltage30 V AC
36 V DC
Minimum switching voltage100 mV (at 10 mA)
Min. switching current1 mA (at 24 V)
Maximum inrush current50 mA
Limiting continuous current50 mA
Interrupting rating (ohmic load) max.1.2 W (at 24 V DC)

Contact side (with destroyed gold layer)

Notethe following values are applicable if a gold layer is destroyed
Maximum switching voltage250 V AC/DC (Separating plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules.)
Minimum switching voltage12 V AC/DC
Limiting continuous current2x 6 A (see derating curve)
Maximum inrush current15 A (300 ms)
Min. switching current10 mA
Interrupting rating (ohmic load) max.140 W (at 24 V DC)
100 W (at 48 V DC)
60 W (at 60 V DC)
44 W (at 110 V DC)
60 W (at 220 V DC)
1500 VA (for 250 V AC)
Switching capacity2 A (at 24 V, DC13)
0.2 A (at 110 V, DC13)
0.2 A (at 250 V, DC13)
2 A (at 24 V, AC15)
2 A (at 120 V, AC15)
2 A (at 250 V, AC15)

Connection data 1

Connection nameCoil side
Connection methodPush-in connection
Stripping length8 mm
Conductor cross section solid0.14 mm² ... 2.5 mm²
Conductor cross section flexible0.14 mm² ... 2.5 mm²
0.2 mm² ... 2.5 mm² ()
2x 0.5 mm² ... 1 mm² ()
Conductor cross section AWG26 ... 14

Connection data 2

Connection nameContact side
Connection methodPush-in connection
Stripping length8 mm
Conductor cross section solid0.14 mm² ... 2.5 mm²
Conductor cross section flexible0.14 mm² ... 2.5 mm²
0.2 mm² ... 2.5 mm² ()
2x 0.5 mm² ... 1 mm² ()
Conductor cross section AWG26 ... 14

General

Test voltage relay winding/relay contact5 kVrms(50 Hz, 1 min.)
Test voltage PDT/PDT2.5 kVrms(50 Hz, 1 min.)
Operating mode100% operating factor
Degree of protectionRT III (Relay)
IP20 (Relay base)
Mechanical service lifeapprox. 3x 107cycles
Mounting positionany
Assembly instructionsIn rows with zero spacing
Net weight (SAP)64.17 g

Standards and Regulations

Connection in acc. with standardCUL
Standards/regulationsEN 50155 (VDE 0115 part 200)
EN 50178
EN 61373
EN 50121
Rated insulation voltage250 V AC
Rated surge voltage6 kV
InsulationBasic insulation
Degree of pollution2
Overvoltage categoryIII
Flammability rating according to UL 94V0

Environmental Product Compliance

REACh SVHCLead 7439-92-1
China RoHSEnvironmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”

Classifications


Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.