OMRON NX-TBA082 NX-TBA082 NX020085B NXTBA082 OMRON Replacement screwless push-in connector with 8 wiring terminals (marked A.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details

NX-TBA082 NX020085B NXTBA082 OMRON Replacement screwless push-in connector with 8 wiring terminals (marked A..

NX-TBA082

NX020085B

NXTBA082

OMRON

1 Pcs.

Replacement screwless push-in connector with 8 wiring terminals (marked A+B)

Automation > Accessories/spare parts for controls
Machine I/O NX-series

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.

Request Quote

Product Overview

The Omron NX-TBA082 replacement screwless push-in connector (part number NX-TBA082) delivers reliable termination points for field wiring on modular automation racks, featuring eight dedicated wire terminals. Terminal blocks of this style are integrated into industrial I/O nodes to speed up device installation and maintenance without the need for tools. Specific pricing, availability and lead time are confirmed per enquiry through an RFQ.

  • Communication coupler: EtherNet/IP Slave
  • Safety controller: NX-Bus
  • Safety Digital Input: 4 inputs + 2 test outputs; 8 inputs + 2 test outputs: Free Run
  • Safety Digital Output: 2 outputs, 2.0 A; 4 outputs, 0.5 A: Free Run
  • Type of electrical accessory/spare part (EF005722): Plug
  • Accessory (EF013236): No
  • Spare part (EF013237): Yes

More info

▲
Features

NX Stand-alone Safety Controller

NX-Safety Stand-alone is a powerful, modular and easily commissioned safety controller which, due to its scalability, can be efficiently adapted to the requirements of a wide variety of safety applications. Thanks to this modular and expandable hardware, the compact safety controller grows with its task slice-by-slice – right up to the highest safety level. You can grow up to 256 I/O points in one single Safety CPU. The design of safe system solutions is thus considerably simplified.

  • The system meets PLe according to the EN ISO 13849-1 and SIL3 according to the IEC 61508 and Cat.4
  • Safety Function Blocks conforming with IEC 61131-3 standard programming
  • Programming with Sysmac Studio software tool
  • EtherNet/IP connectivity

Ordering information

NX_Safety_stand-alone_rev01-1.png

Communication and control units

Module Type

Protocol

Connection

Specification

Width

Order Code

Communication coupler

EtherNet/IP Slave

2 RJ45 ports

with built-in switch

Up to 63 I/O units.

Max. 512 bytes in + 512 bytes out

Supports local safety communication

Free Run I/O refresh mode only

I/O power supply up to 10 A

46 mm

NX-EIC202

Safety controller

NX-Bus

32 Safety connections

512 KB Safety program capacity

Up to 63 Safety/Standard slices

Max. 32 Safety slices

Up to 256 safety I/O points

Safety and standard digital/analog slices can be connected

30 mm

NX-SL3300

Safety digital I/O units

Module type

Channels, Signal type

Performance1, I/O Refresh Mode

Connection type

Width

Order Code

Safety Digital Input

4 inputs + 2 test outputs

Free Run

Screwless push-in (NX-TBA082)

12 mm

NX-SIH400

8 inputs + 2 test outputs

Free Run

Screwless push-in (NX-TBA162)

12 mm

NX-SID800

Safety Digital Output

2 outputs, 2.0 A

Free Run

Screwless push-in (NX-TBA082)

12 mm

NX-SOH200

4 outputs, 0.5 A

Free Run

Screwless push-in (NX-TBA082)

12 mm

NX-SOD400

Note:For selecting the compatible NX Digital and Analog I/O units, please refer to the NX-series modular I/O system chapter from this catalogue, check the Sysmac Studio Software I/O edition software tool or visit our website. As this selection is technically not easy, is better to contact our Omron support.


1.Digital I/O performance


Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.