OBO BETTERMANN V20-C 3PHFS-1000 V20-C 3PHFS-1000 5094574 OBO BETTERMANN SurgeController V20 three-pole for photovoltaics, 1000V DC, View larger
Images are for illustrative purposes only. Please refer to data sheet for details

V20-C 3PHFS-1000 5094574 OBO BETTERMANN SurgeController V20 three-pole for photovoltaics, 1000V DC,

V20-C 3PHFS-1000

5094574

OBO BETTERMANN

1 Pcs.

SurgeController V20 three-pole for photovoltaics, 1000V DC, PV surge protection V20, 1,000 V DC with remote signalling. V20 surge arrester, type 2, for photovoltaic systems• Complete unit, consisting of plug-in varistor arrester with cut-off unit• Error-resistant Y circuit to VDE 0100-712 (EN 50539-12)• Surge protection equipotential bonding to VDE 0100-443 (IEC 60364-4-44)• V20-C 3-PH-1000 tested to EN 50539-11 (VDE / KEMA)• Arresting capacity to 40 kA (8/20) per pole• Low DC protection level: < 4.0 kV and Voc max = 1,000 V DC• With visual status display for use in distributor housings Application: PV systems with or without separate lightning protection system

Automation > Surge protection device for power supply systems
Surge , photovoltaics

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.

Request Quote

Product Overview

V20-C 3PHFS-1000 5094574 Obo Bettermann SurgeController V20 three-pole for photovoltaics, 1000V DC protects solar power systems and inverter equipment against destructive transient overvoltages. Typically positioned in DC combiner boxes or close to charge controllers, this specialized surge suppressor safeguards renewable energy infrastructure. Pricing, availability and lead time are confirmed per enquiry through an RFQ.

  • Blow-out: no
  • CO2 Footprint (GWP) Cradle-to-Gate: 1,0344 kg CO2e / 1 Piece
  • Conductor cross-section, rigid (single-wire/multiwire), max.: 35 mm²
  • Conductor cross-section, rigid (single-wire/multiwire), min.: 2,5 mm²
  • DC network form: yes
  • Dimension: 1000V DC
  • FM contacts: Changeover
  • Installation type: DIN rail 35 mm
  • Lightning protection zone LPZ: 1→2
  • Max. mains-side overcurrent protection: 125
  • Maximum back-up fuse: 125 A
  • Maximum continuous voltage DC: 1000 V
  • Maximum discharge current (8/20 μs): 40 kA
  • Nominal discharge current (8/20 µs): 20 kA
  • Operating temperature, max.: 80 °C
  • Operating temperature, min.: -40 °C

More info

▲
Blow-outno
CO2 Footprint (GWP) Cradle-to-Gate1,0344 kg CO2e / 1 Piece
Conductor cross-section, rigid (single-wire/multiwire), max.35 mm²
Conductor cross-section, rigid (single-wire/multiwire), min.2,5 mm²
DC network formyes
Dimension1000V DC
FM contactsChangeover
Installation typeDIN rail 35 mm
Lightning protection zone LPZ1→2
Max. mains-side overcurrent protection125
Maximum back-up fuse125 A
Maximum continuous voltage DC1000 V
Maximum discharge current (8/20 μs)40 kA
Network formOther
Nominal discharge current (8/20 µs)20 kA
Operating temperature, max.80 °C
Operating temperature, min.-40 °C
Permitted temperature range, max.80 °C
Permitted temperature range, min.-40 °C
Pole version3
Protection ratingIP20
Remote signallingyes
Response time<25 ns
Signalling on deviceVisual
SPD to EN 61643-11Type 2
SPD to IEC 61643-1Class II
Test class, type 2yes
Version for3-pole for PV systems with FS

Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.