View larger
662631 LEGRAND URAONE LVS2 100LM 1H IP42 P/NP
662631
662631
LEGRAND
1 Pcs.
Automation > Emergency luminaire
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
Legrand 662631 LEGRAND URAONE LVS2 100LM 1H IP42 P/NP is a self-testing emergency bulkhead luminaire used in industrial environments to guarantee visibility along egress routes during blackouts. Such self-monitoring safety luminaires perform routine diagnostic checks to verify battery health and operational readiness. Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Conductor cross section (EF000085): 2.5 mm²
- With remote control (EF000483): No
- Lamp type (EF002423): LED non-replaceable
- Mounting method (EF000003): Wall surface mounted
- Connection type (EF000124): Screw connection
- Material cover (EF004284): Plastic opal
- With remote switch connection (EF007947): No
- Max. system power (EF009347): 10 W
- Colour temperature (EF009346): 6000 K
- Rated luminous flux according to IEC 62722-2-1 (EF009349): 100 lm
- Number of lighting heads (EF004258): 1
- Nominal current (EF009345): 43 mA
- Impact strength (EF004293): IK07
- Monitoring equipment (EF008091): Automatic self test
- Protection class according to IEC 61140 (EF000004): II
- Height/depth (EF001456): 41 mm
More info
▲- Pack (number of units)1
- Volume (dm3)1.538
- Weight (g)477.00
- Autotest/addressable luminaires incorporate an automatic self-testing system in order to check the emergency mode
- Tests result is visible on 2 signalling LEDs (green-OK and yellow-defective)
- Addressable function is activated by setting an ID on each luminaire with infrared configuration tool (Cat.No 0 626 10) and wiring a complementary BUS line
- Operating state of all addressable luminaires can be centralized by the control interface (Cat.No 0 626 00) and monitored on a local touch screen controller (Cat.No 0 626 01), or with the building’s plan on Legrand Vision System (LVS2) PC software (Cat.No 0 626 02)
- These Maintained luminaires can also operate in Non-maintained mode according to the wiring of normal lighting
- 100 lm - 1h (LEDs)
- LED non-maintained and maintained units
- Certified to IEC and EN 60598-2-22 standards
- High power LEDs with optimized lighting distribution
- Low consumption switching power supply. Fully recyclable
- Plug-in back with pre-cutted holes grid to ease installation and maintenance
- Automatic terminals with high capacity: 2 x 2.5mm². IP 42 - IK 07
- Duration: 1 and 3 hours. Ni-Cd or Ni-MH batteries. Recharge time: 24 hours. Charge monitor with a green LED. Opal diffuser
- Power supply: 230 V~ ± 10% - 50/60 Hz. Class II
- Flat flush-mounting integration into ceiling and wall with flush-mounting frame Cat.Nos 6 616 50/51
- Decorative frame to enhance surface-mounting aesthetic integration Cat.Nos 6 616 54/55