View larger
Images are for illustrative purposes only. Please refer to data sheet for details
2510001 ÖLFLEX HEAT 180 FZLSi 1X1 LAPP ÖLFLEX HEAT 180 FZLSi 1X1
2510001
2510001
ÖLFLEX HEAT 180 FZLSi 1X1
LAPP
100 m.
ÖLFLEX HEAT 180 FZLSi 1X1
ÖLFLEX® HEAT 180 FZLSi
Cables > Power cable >= 1 kV, for permanent installation
ÖLFLEX HEAT Temperature measurement cables
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteMore info
▲ÖLFLEX® HEAT 180 FZLSi - silicone single core for special use as 10 kV high-voltage ignition wire for expanded temperatures up to +180°C
10 kV high-voltage ignition wire
Benefits
- Possesses insulating properties after combustion due to remaining SiO2 ash on the conductor
Application range
- Areas with high ambient temperatures where conventional core insulation materials will embrittle after a short while
- Typical fields of application
- Control cabinet manufacturing
- Appliances and apparatus engineering
- Electric motor industry
- Sauna/solarium construction
- Thermal and heating elements
- Lighting technology
- Ventilator engineering
- Air-conditioning technology
- Furnace construction
- Polymer processing
- Generator and transformer manufacturing - ÖLFLEX® HEAT 180 SiZ is suitable as electrical sensor cable in pipe systems for modern solar hot water systems
Product features
- Halogen-free according to IEC 60754-1
(amount of halogen acid gas)
Corrosiveness of combustion gases according to IEC 60754-2 (degree of acidity) - Flame-retardant according IEC 60332-1-2
- Resistant to a multitude of oils, alcohols, vegetable and animal fats and chemical substances
- Adequate ventilation must be ensured, since the mechanical properties of silicone cables decrease from +100°C in the absence of air
Norm references / Approvals
- Increased voltage rating is not subject to theLow Voltage Directive 2014/35/EU
Product Make-up
- Fine-wire, tinned-copper conductor
- Silicone-based insulation
- Colour of core insulation: red
Classification ETIM 5
- ETIM 5.0 Class-ID: EC000993
- ETIM 5.0 Class-Description: Single core cable
Classification ETIM 6
- ETIM 6.0 Class-ID: EC000993
- ETIM 6.0 Class-Description: Single core cable
Conductor stranding
- Fine wire acc. to VDE 0295, class 5 / IEC 60228 class 5 from 0.5 mm²
Minimum bending radius
- Fixed installation: 6 x core diameter
One bend at end of core:
3 x cable diameter
Nominal voltage
- Version SiF/GL / SiZ:
U0/U 300/500 V
Version FZLSi:
10 kV
Test voltage
- Version SiF/GL / SiZ:
2000 V
Version FZLSi:
20 kV
Temperature range
- -50 °C to +180 °C
(adequate ventilation required) - Short-term: +200°C