LAPP 2170822 2170822 UNITRONIC BUS PB FD P A 1X2X0,64 LAPP UNITRONIC BUS PB FD P A 1X2X0,64 View larger
Images are for illustrative purposes only. Please refer to data sheet for details

2170822 UNITRONIC BUS PB FD P A 1X2X0,64 LAPP UNITRONIC BUS PB FD P A 1X2X0,64

2170822

2170822

UNITRONIC BUS PB FD P A 1X2X0,64

LAPP

1 m.

UNITRONIC BUS PB FD P A 1X2X0,64 UNITRONIC® BUS PB FD P A

Cables > Data and communication cable
UNITRONIC BUS cabling

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.

Request Quote

Product Overview

The Lapp 2170822 UNITRONIC BUS PB FD P A 1X2X0,64 is a dedicated industrial bus data cable used to interconnect automation devices within fieldbus communication architectures. Such cables are standard in manufacturing plants for linking programmable logic controllers, sensors, and actuators running on specific network protocols. Pricing, availability, and lead time are confirmed per enquiry through an RFQ.

  • Certification: UL/CSA type CMX in accordance with UL 444 and CSA C22.2 no. 214
  • Core insulation: foam skin, (O2YS)
  • Outer sheath: PUR, violet (RAL 4001)
  • Mutual capacitance: max. 30 nF/km at 800 Hz
  • Core/core test voltage: 1500 V rms
  • Flexing temperature: -30°C to +70°C
  • Fixed installation temperature: -40°C to +80°C

More info

▲

Bus cable for PROFIBUS-DP, -FMS and FIP. UL/CSA approved, Halogen free and enhanced flame retardance. Temperature range from -40°C bis +80°C

A for Advanced
here: UL and CSA certifications

Benefits

  • For use where the combination of a halogen-free outer sheath with properties similar to PUR and enhanced flame-retardance is required
  • Cables can be used for PROFIBUS-DP as well as PROFIBUS-FMS and FIP

Application range

  • PROFIBUS DP (in accordance with DIN 19245 and EN 50170, e.g. for SIEMENS SIMATIC® NET, also suitable for FIP - Factory Instrumentation Protocol).
  • For highly flexible applications (power chains, moving machine parts)
  • Suitable for torsional applications which are typical for the loop in wind turbine generators (WTG)

Product features

  • Halogen-free
  • Flame-retardant according IEC 60332-1-2
  • Oil-resistant
  • Based on the bit rates listed, in accordance with PNO specifications the following maximum cable lengths for a bus segment apply
    (cable type A, PROFIBUS-DP):
    93.75 kbit/s = 1200 m
    187.5 kbit/s = 1000 m
    500 kbit/s = 400 m
    1.5 Mbit/s = 200 m
    12.0 Mbit/s = 100 m

Norm references / Approvals

  • Certification: UL/CSA type CMX in accordance with UL 444 and CSA C22.2 no. 214

Product Make-up

  • Stranded bare copper wire
  • Core insulation: foam skin, (O2YS)
  • Overall screening with copper braid and plastic-laminated aluminium foil
  • Outer sheath: PUR, violet (RAL 4001)

Classification ETIM 5

  • ETIM 5.0 Class-ID: EC000830
  • ETIM 5.0 Class-Description: Data cable

Classification ETIM 6

  • ETIM 6.0 Class-ID: EC000830
  • ETIM 6.0 Class-Description: Data cable

Mutual capacitance

  • (800 Hz): max. 30 nF/km

Peak operating voltage

  • (not for power applications) 250 V

Torsion movement in WTG (wind turbine generator)

  • TW-0 & TW-2, refer to Appendix T0

Minimum bending radius

  • 65 mm

Test voltage

  • Core/core: 1500 V rms

Characteristic impedance

  • 150 ± 15 Ohm

Temperature range

  • Flexing: -30°C to +70°C
  • Fixed installation: -40°C to +80°C

Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.