View larger
2170195 UNITRONIC LAN 500 U/FTP Cat.6A LSZH LAPP Ethernet cable for Category 6, class EA, verified up to 500..
2170195
2170195
UNITRONIC LAN 500 U/FTP Cat.6A LSZH
LAPP
100 m.
Cables > Data and communication cable
UNITRONIC LAN cabling
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
A Lapp 2170195 UNITRONIC LAN 500 U/FTP Cat.6A LSZH Ethernet cable for Category 6, class EA, verified up to 500.. is applied in structured networking infrastructures to transmit high-bandwidth digital data across commercial and industrial facilities. This shielded Ethernet line maintains signal integrity over long transmission distances. Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Flame retardant acc. to IEC 60332-1-2 2170195 2170196: flame retardant acc. to IEC 60332-1-2 and IEC 60332-3-24
- IEEE 802.3: 10/100/1000Base-T, 10GBase-T IEEE 802.5: ISDN
- FDDI; ATM; U/FTP: aluminium compound foil as pair screening
- F/FTP: aluminium compound foil as overall screening and pair screening
- S/FTP: copper braid as overall screening and pair screening with aluminium compound foil
- during installation: 8 x outer diameter
- Fixed installation: 4 x outer diameter
- Fixed installation: -20°C to +60°C
- Flexing: 0°C to +50°C
- ETIM 5.0 Class-ID: EC000830
- ETIM 5.0 Class-Description: Data cable
- ETIM 6.0 Class-ID: EC000830
- ETIM 6.0 Class-Description: Data cable
More info
▲The LAN cable with a characteristic impedance of approximately 100 ohms is suitable for structured building wiring networks. It has solid core conductor and high-quality shielding.
CPR: Article number choice under www.lappkabel.com/cpr
Benefits
- LAN cables for structured building cabling according to EN 50173 and ISO/IEC 11801
Application range
- Mainly used where the terminal density is very high, e.g. for wiring office, administration and development buildings in the tertiary area (floor wiring).
- Cable length in tertiary area (horizontal area, floor) should not exceed a length of 100 m in accordance with the ISO/IEC 11801 and EN 50173 standards (90 m in cable duct + 10 m in working area)
Product features
- Transfer of digital and analogue data signals
- Flame retardant acc. to IEC 60332-1-2
2170195
2170196: flame retardant acc. to IEC 60332-1-2 and IEC 60332-3-24 - IEEE 802.3: 10/100/1000Base-T, 10GBase-T IEEE 802.5: ISDN; FDDI; ATM
Norm references / Approvals
- Class EA out of the standard ISO/IEC 11801 corresponds to Cat.6A
- LAN Cat.6A cables from Lapp Kabel for "Structured Cabling Systems” meet the requirements in accordance with EIA/TIA-568 and TSB36, as well as ISO/IEC 11801 or EN 50173 (Class EA - permanent link).
Product Make-up
- Solid conductor
- U/FTP: aluminium compound foil as pair screening
- F/FTP: aluminium compound foil as overall screening and pair screening
- S/FTP: copper braid as overall screening and pair screening with aluminium compound foil
- outer sheath either as PVC (color grey RAL1015) or LSZH (color orange RAL2003)
Classification ETIM 5
- ETIM 5.0 Class-ID: EC000830
- ETIM 5.0 Class-Description: Data cable
Classification ETIM 6
- ETIM 6.0 Class-ID: EC000830
- ETIM 6.0 Class-Description: Data cable
Minimum bending radius
- during installation: 8 x outer diameter
- Fixed installation: 4 x outer diameter
Characteristic impedance
- 100 Ω ± 15%
Temperature range
- Fixed installation: -20°C to +60°C
- Flexing: 0°C to +50°C