View larger
15310001 ÖLFLEX TRAIN 310 TW-P 300V 7X0,5 LAPP ÖLFLEX TRAIN 310 TW-P 300V 7X0,5
15310001
15310001
ÖLFLEX TRAIN 310 TW-P 300V 7X0,5
LAPP
1 m.
Cables > Power cable less 1 kV, for permanent installation
ÖLFLEX TRAIN
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
Designed specifically for rolling stock environments, the Lapp 15310001 ÖLFLEX TRAIN 310 TW-P 300V 7X0,5 control cable supports reliable multi-conductor signal transmission on rail vehicles. Railway and mass transit builders depend on these specialized harnesses to withstand continuous operational stress. Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- High temperature resistance: -50°C up to +125°C
- NF F 16-101: see data sheet
- Insulation: Electron beam cross-linked Polymer compound acc. to EN 50306
- Colour of insulation: White with black numbers
- Outer sheath: electron beam cross-linked polymer-compound S2 acc. to EN 50306
- Outer sheath colour: Black
- Occasional flexing: ≤ 12 mm: 5 x OD > 12 mm: 6 x OD (OD = outer diameter)
- U 0: 600 V AC U 0 /U: 300/500 V AC acc. to EN 50306 U m : 550 V AC
- Fixed installation: -45°C to +125°C (20.000 h) -50°C acc. to GOST 20.57.406-81
- Occasional flexing: -35°C to +105°C Short circuit: +160°C (5s)
- ETIM 5.0 Class-ID: EC000104
- ETIM 5.0 Class-Description: Control cable
- ETIM 6.0 Class-ID: EC000104
- ETIM 6.0 Class-Description: Control cable
More info
▲ÖLFLEX® TRAIN 310 TW-P 300V - control cable according EN 50306-4 1P type MM, 300/500V for rail vehicles/trains, EN 45545: HL1-HL3, NF F 16-101: C/F0, NFPA 130
- Meets EN 50306-4 class P, type MM and
EN 45545-2 - High temperature resistance: -50°C up to +125°C
- Highly oil- and fuel-resistant
Benefits
- Reduced insulation wall thickness, thus space-saving installation
- Good chemical resistance please see Appendix T1
- Resistant to mechanical influences in harsh environmental conditions
- Extended temperature range
- Reduced flame spreading increases the protection against damage to persons and property in the event of a fire
Application range
- For use in railway vehicles, for fixed and protected installation and applications where limited movement may occur
- Suitable for control and monitoring circuits as well as locking circuits and internal wiring of equipment in trains and locomotives
- Also applicable within oily environments and areas with increased ambient temperature
Product features
- Fire behaviour according to EN/IEC:
- Halogen-free acc. to EN 60754-1
- No corrosive gases acc. to EN 60754-2
- No fluorine acc. to EN 60684-2
- No toxic gases acc. to EN 50305
- Low smoke density acc. to EN 61034-2
- Flame-retardant acc. to EN 60332-1-2
- No flame propagation acc. to
EN 60332-3-24 / EN 60332-3-25 /
EN 50305 - Fire behaviour according to NF:
- Toxicity of gases acc. to NF X 70-100
- Low smoke density acc. to NF X 10-702
- No flame propagation acc. to NF C 32-070,
Cat. C1 and C2 - Chemical properties:
- Oil resistant acc. to EN 50306
- Fuel resistant acc. to EN 50306
- Acid resistant acc. to EN 50306
- Alkali resistant acc. to EN 50306
- Ozone resistant acc. to EN 50306 - Current rating according to EN 50355, appendix A
Norm references / Approvals
- EN 50306-4 class P, type MM
- EN 45545-2 HL1, HL2, HL3
- NF F 16-101: see data sheet
- Compliant with NFPA 130
Product Make-up
- Tinned-copper strand, 19 or 37 wires, SRC (Special Round Conductor)
- Insulation: Electron beam cross-linked Polymer compound acc. to EN 50306
- Colour of insulation: White with black numbers
- Outer sheath: electron beam cross-linked polymer-compound S2 acc. to EN 50306
- Outer sheath colour: Black
Classification ETIM 5
- ETIM 5.0 Class-ID: EC000104
- ETIM 5.0 Class-Description: Control cable
Classification ETIM 6
- ETIM 6.0 Class-ID: EC000104
- ETIM 6.0 Class-Description: Control cable
Core identification code
- White with black numbers
Conductor stranding
- SRC (special round conductor) 19 or 37 wires acc. to EN 50306-1
Minimum bending radius
- Fixed installation:
≤ 12 mm: 4 x OD / 3 x OD*
> 12 mm: 5 x OD / 4 x OD*
* for careful bending, once at
connecting terminal - Occasional flexing:
≤ 12 mm: 5 x OD
> 12 mm: 6 x OD
(OD = outer diameter)
Nominal voltage
- U0: 600 V AC
U0/U: 300/500 V AC acc. to EN 50306
Um: 550 V AC
Test voltage
- 3,5 kV AC; 8,4 kV DC
Protective conductor
- G = with GN-YE protective conductor
X = without protective conductor
Temperature range
- Fixed installation:
-45°C to +125°C (20.000 h)
-50°C acc. to GOST 20.57.406-81 - Occasional flexing:
-35°C to +105°C
Short circuit: +160°C (5s)