View larger
0039059 ÖLFLEX CRANE 18G1,5 LAPP ÖLFLEX CRANE 18G1,5
0039059
0039059
ÖLFLEX CRANE 18G1,5
LAPP
1 m.
Cables > Power cable less 1 kV, for moving application
Control cables for special applications
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
Engineered for high-stress overhead lifting, the Lapp 0039059 ÖLFLEX CRANE 18G1,5 flexible cable manages power distribution on industrial cranes and hoist units. These durable multi-core lines maintain reliable connectivity under continuous flexing cycles in material handling operations. Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Core insulation: rubber compound
- Outer sheath: rubber compound, type EM2
- Up to 5 cores: colour-coded according to VDE 0293-308, refer to Appendix T9
- From 6 cores: black with white numbers
- Flexible use: 12.5 x outer diameter
- Fixed installation: 6 x outer diameter
- U0/U: 300/500 V
- Flexible use: -25°C to +80°C
- Fixed installation: -40°C to +80°C
- ETIM 5.0 Class-ID: EC001578
- ETIM 5.0 Class-Description: Flexible cable
- ETIM 6.0 Class-ID: EC001578
- ETIM 6.0 Class-Description: Flexible cable
More info
▲ÖLFLEX® CRANE - flexible cable, flame retardant for outdor use and crane applications/conveyour technology, power and control rubber cable, U0/U:300/500V
- Suitable for outdoor use
- Integrated supporting element
- Also suitable for power chains and
cable trolley systems
Benefits
- Weather-resistant for harsh environmental conditions
- Very flexible due to extra-fine wire conductor design
- Cables up to a max. 24 cores can also be used in power chains
Application range
- Machinery and equipment that are permanently exposed to the weather; conveying and hoisting equipment; construction machinery; shipyard machinery
- Suitable for use in special conditions, such as not more than 2 weeks without interruption of submersion in industrial or sea water
- The application profiles for ÖLFLEX® CRANE and ÖLFLEX® LIFT cables can be found in the appendix, selection table A3
- For highly flexible applications, please follow the assembly guidelines for ÖLFLEX® FD cables in power chains; see appendix T3
Product features
- Flame-retardant according IEC 60332-1-2
- Not suitable for use on guide pulleys or drums under tensile load
- Refer to the article table for the tensile strength of the cable
- The cable should be installed in a way that the supporting element can absorb the tensile forces
- The mobility of the cores must not be affected by the clamps
Norm references / Approvals
- Based on VDE 0250
Product Make-up
- Conductor made of bare copper wires
- Core insulation: rubber compound
- Special supporting element as strain relief
- Outer sheath: rubber compound, type EM2
Classification ETIM 5
- ETIM 5.0 Class-ID: EC001578
- ETIM 5.0 Class-Description: Flexible cable
Classification ETIM 6
- ETIM 6.0 Class-ID: EC001578
- ETIM 6.0 Class-Description: Flexible cable
Core identification code
- Up to 5 cores: colour-coded according to VDE 0293-308, refer to Appendix T9
- From 6 cores: black with white numbers
Conductor stranding
- 0.15 mm wire diameter at 1.0 mm²
- 0.20 mm wire diameter from 1.5 mm²
Minimum bending radius
- Flexible use: 12.5 x outer diameter
- Fixed installation: 6 x outer diameter
Nominal voltage
- U0/U: 300/500 V
Test voltage
- 3000 V
Protective conductor
- G = with GN-YE protective conductor
- X = without protective conductor
Temperature range
- Flexible use: -25°C to +80°C
- Fixed installation: -40°C to +80°C